UC Series
UC Series
Analogue instruments include synchroscopes and sequence-meters designed for single and three-phase circuits. Synchroscopes (SMC/STC) are Class 1 instruments, while sequence-meters (UC/CUC) are Class 1.5 with low consumption.
The instruments operate with an input circuit consumption of 3 mA and a frequency range of 20 to 100 Hz for synchroscopes and 50 Hz for sequence-meters. They can handle overloads of 1.2 times the nominal voltage permanently and 2 times for 5 seconds. Measurement accuracy is 1.5% FE, with operating temperatures ranging from +10 to +30 ºC for synchroscopes and 0 to 70 ºC for sequence-meters. The front panel can withstand temperatures from -25 to +40 ºC for synchroscopes and -40 to +70 ºC for sequence-meters, with an altitude limit of 2000 m.
The instruments are housed in panel-type boxes with specific dimensions and weights detailed in accompanying tables. They comply with standards such as BS 89, EN 60051, IEC 144, UL 94, DIN 43780, IEC 51, and UNE 21318.
Synchroscopes (SMC/STC) are used to measure the frequency and phase angle difference between two generators or a generator and the network. The needle indicates synchronism when it moves from the (-) to the (+) side as the frequency difference approaches zero. Sequence-meters (UC/CUC) indicate the order of three-phase systems and include a relay that deactivates in the absence of voltage or incorrect phase order.
Detailed references for single-phase and three-phase synchroscopes and sequence-meters are provided, including dimensions and weights. Synchroscopes are available in types STC 96, STC 144, SMC 96, and SMC 144, while sequence-meters are available in types UC 72, UC 96, and CUC 96.
Catalog excerpts
Analogue instruments Synchronisation and marine applications equipment SMC / STC / UC / CUC Input circuit circuit Consumption Class 1 For single and three-phase circuits Measurement voltage Accuracy Ambient conditions Operating temperature Front panel Build features Dimensions Degree of protection: Front panel terminals Insulation voltage Standards
Open the catalog to page 1
Analogue instruments Synchronisation and marine applications equipment SMC / STC Synchroscopes To provide a correct reading of the difference between the frequency and phase angle be- tween two generators or a generator and the network, when connected in parallel. When the difference is zero, the instrument's needle does not move from the synchronisation mark located in the centre of the scale. The instrument scale is divided in two areas marked with the (+) and (-) signs. These signs indicate whether the machine being connected has a higher or lower frequency that the other one, respectively....
Open the catalog to page 2
Analogue instruments Synchronisation and marine applications equipment Internal Code
Open the catalog to page 3All CIRCUTOR catalogs and technical brochures
DCB, Digital instruments2 Pages
BC48 15V4 Pages
WRU-10, Smart protection2 Pages
REC4, Self-reclosing RCCB8 Pages
Electric Vehicle Charging8 Pages
Solutions for AMI systems20 Pages
Solutions for ISO 5000112 Pages
TCP2RS+4 Pages
LM4I4O-M4 Pages
Solar photovoltaic canopies8 Pages
Solutions for Self-consumption16 Pages
MYeBOX Connected to efficiency12 Pages
Archived catalogs
DIGITAL INSTRUMENTS34 Pages
Smart earth leakage protection32 Pages
ANALOGUE INSTRUMENTS64 Pages
Módem Router 3G2 Pages
computer Smart2 Pages
DIR21 Page
ReadWatt2 Pages
RS2RS1 Page
FLEX-R1 Page
MS1 Page
C-FLEX Series4 Pages
Type B8 Pages
CIRWATT B 410T3 Pages
CIRWATT B 5022 Pages
CIRWATT-B5052 Pages
TL-51 Page
BC-A3 Pages
BC-V3 Pages
HC2 Pages
FEMC-FETC3 Pages
CIRWATT-B1002 Pages
RGU22 Pages
CBS42 Pages
RECmaxLPD2 Pages
RECmaxMP2 Pages
MT-FDE2 Pages
FRE2 Pages
CVM-C52 Pages
AR62 Pages
cSMARTIII2 Pages
RVE2-P2 Pages
OPTIM-HYB2 Pages
CEM-C102 Pages
CEM-C202 Pages
RGU-10B2 Pages
LM4I/4O-M2 Pages
SGE-PLC Series2 Pages
TRMC2 Pages
PGR Series2 Pages
BM-V3 Pages
CVM-A Series7 Pages
URBAN2 Pages
RAPTION 1502 Pages
EC-A5 Pages
EC-V5 Pages
WMC-WTC5 Pages
FMZ-FTZ3 Pages
SMC-STC3 Pages
SYNCHROMAX3 Pages
MEG2 Pages
C-convert9 Pages
TSR1 Page
AR5L9 Pages
C804 Pages
WGBU3 Pages
WI2 Pages
CR Series1 Page
LR-LRB3 Pages
computer MAX2 Pages
CV2 Pages
CLZ-FP-HD5 Pages
R-RE-RBE2 Pages
LVC1 Page
RGU102 Pages
WGC series2 Pages
RGE2 Pages
RG1M2 Pages
CSB2 Pages
CVM Power analyzers40 Pages
MCB2 Pages
TSA2 Pages
Short-Form 2021162 Pages
- Display module
- CIRCUTOR transformer
- Measuring device
- Management software solution
- Monitoring analyzer
- CIRCUTOR dry transformer
- Analysis software solution
- Digital I/O
- Measuring machine
- Windows software
- IO module
- Digital indicator
- Digital IO module
- CIRCUTOR capacitor
- Circuit breaker
- Portable analyzer
- LED display panel
- Industrial software
- Panel panel meter
- CIRCUTOR current transformer