PROTEC TION AND CONTROL — Residual current protection solutions for EV charging point

INTRODUC TION — The need to ensure adequate protection at EV charging points The electric vehicle development plan is in full swing, and it is estimated that these vehicles will be fully integrated in coming years, leading to the phasing out of combustion engine vehicles. The higher the number of electric vehicles and, as a result, the number of charging points, the more of these points non-specialised personnel will be exposed to in public spaces. This requires installing suitable residual current protection devices for installations and people. This will result in better service at charging...

Residual current protection How can EV charging points be protected? For years, residual current protection has focused on the safety of people and property, guaranteeing continuity of service in electrical installations. In the wake of the appearance of this new type of installation, Circutor has developed a specific range of RCCBs. This range includes both type A+6 mA DC and type B breakers, without and with reclosing systems to ensure continuity of supply. They allow consumers to use these points safely, in compliance with the applicable standards and ensuring peak operational performance....

Type A residual current protection IDA-EV Avoids replacing the RCCB installed upstream, ensuring correct vertical selectivity. Type A RCCB with 6 mAdc current detection ☑ Preserves the type of residual current protection upstream ☑ Residual current protection for EV chargers approved as a single device as per IEC 62955 ☑ Easy installation on DIN rail ☑ For any type of layout allowed in ITC-52 and IEC 60364-7-722 for electric vehicle charging installations ☑ Withstands extreme weather conditions. Expanded operating temperature range from -25 to 65 °C. Fault currents in excess of 6 mADC can be...

Type A residual current protection with reclosing REC4-EV-C Avoids replacing the RCCB installed upstream, ensuring correct vertical selectivity. Reclosing type A RCCB with 6 mAdc current detection and status output ☑ Type A+6 mADC residual current protection ☑ Compact device ☑ Easy installation on DIN rail REC4-EV-C incorporates type A RCCB with 6 mAdc current detection for single-phase or three-phase installations, associated with a reclosing motor, which lets the RCCB safely reclose if it tripped as the result of an unwanted trip, so that we can quickly restore the recharge of the connected...

Type B residual current protection IDB-4 For installations that require Type B protection Type-B RCCB ☑ Easy installation on DIN rail ☑ Provides protection as per ITC-52 and IEC 60364-7-722 for electric vehicle charging stations ☑ Withstands extreme weather conditions. Expanded operating temperature range from -25 to 65 °C. Designed for EV charging installations that require the use of a type B RCCB (according to standards or regulations), or in cases where required by the project design. The IDB-4 is a compact RCCB designed for DIN rail installation. It guarantees adequate type B protection...

Type B residual current protection with reclosing RECB-EV-C For installations that require Type B protection. Reclosing type-B RCCB with status output Avoids unnecessary travel to restore the supply. Guaranteed service continuity. RECB-EV-C features a type-B RCCB for singleor three-phase installations linked to a reclosing motor. ☑ Type B residual current protection Type B protection Sinusoidal alternating current Pulsating alternating current Direct current ☑ Compact device Easy installation on DIN rail ☑ Remote reclosing and trip ☑ Breaker status via digital output The reclosing system on this...

Vial Sant Jordi, s/n 08232 Viladecavalls Barcelona (Spain) t. +34. 93 745 29 00 [email protected] C2P803. CIRCUTOR, SA reserves the right to modify any information contained in this catalogue.