Módem Router 3G

Product catalog summary

Specifications:
The 3G Modem Router operates with a power supply range of 85 to 265 Va.c. and a maximum power consumption of 15 W. It functions within an operating temperature of -10 to +60 ºC and humidity levels of 5% to 95%. The modem supports GPRS, EDGE, UMTS, and HSPA radio connections across frequencies 850, 900, 1800, and 1900 MHz. It includes a GPRS/3G interface, an external antenna, and supports protocols such as PDP, ipv4, and ppp. The device features one Ethernet port, RS-232 and RS-485 serial ports, and automatic detection for 10/100 Ethernet. It is designed for DIN Rail installation and has a protection degree of IP-55.

Procedures and Protocols:
The modem supports MAC filtering, RIP v2, static routing, NAT/Port Mapping, and DYN DNS Protocol for dynamic IP. It includes features for GPRS fault detection, local and remote firmware updates, and communication quality monitoring via IP-GPRS. The device also supports HTTP and HTTPS web servers, Syslog, and NTP Protocol for time adjustment.

Capabilities:
The modem is designed to communicate with energy meters and other units, featuring EDGE/HSDPA communications and GPRS mode activation when 3G coverage is unavailable. It supports both fixed and dynamic IP addresses and includes built-in Ethernet, RS-232, and RS-485 ports. The modem can be configured via a web server and supports UDP, TCP, and FTP protocols for Ethernet ports. Additional capabilities include remote configuration, SMS message delivery, IP and port configuration, APN configuration, user/password configuration, and status LEDs.

Installation and Connections:
The modem is installed on a DIN Rail according to EN 60715 standards. It includes connections for Ethernet, RS-485, RS-232, and Internet 3G. The dimensions of the modem are 150 mm x 120 mm x 43 mm.

Catalog excerpts

Current transformers for billing and accessories Modem Router 3GModem Router 3G Power circuit Power supply Maximum power consumption Environmental conditions Operating temperature Humidity Radio Connection Mode Working frequency GPRS / 3G Interface External antenna Modem SIM card SIM Security Protocols ETHERNET Serial port 10/100 Automatic detection ETHERNET V2 / IEEE 802.3 Antenna connector type Nominal impedance of the antenna Type of installation Protection degree Protocol MAC Filtering Router Protocol Safety Dynamic IP Hand-Over GPRS Fault detection Firmware Update Communication Quality WEB Server Syslog Time adjustment CIRCUTOR’S 3G Modem Router is designed to communicate with energy meters or other units. The modem's main feature is a system that can establish communications with EDGE / HSDPA (High Speed Downlink Packet Access); it will activate the GPRS communications mode when there is no 3G coverage. It can establish communications via a fixed or dynamic IP address (DYNDNS) The modem has built-in ETHERNET, RS-232 and RS-485 ports. The modem's routing is configured from the WEB site. Modem capabilities: O uto-reset every 24 hours. O EDGE / HSDPA Communications. O GPRS Communications. O Fixed IP systems compatible O DYNDNS compatible O Ethernet, RS-232 and RS-485 communications O Modem configuration WEBSERVER O Transparent protocol for communicating with the energy meters. O UDP, TCP and FTP Protocols (only valid for the Ethernet port). O Remote modem configuration. O SMS message delivery O IP and port configuration O APN configuration O User / Password configuration O Status LEDs 85 ... 265 Vac 15 W -10 ... +60 °C 5% to 95% GPRS, EDGE, UMTS, HSPA 850, 900, 1800, 1900 Yes Yes 1 bay SIM card inserted on the rear of the modem PDP, ipv4 and ppp 1 port RS-232 and RS-485 Yes Yes Female SMA Connector 5 n DIN Rail (in accordance with EN 60715) IP -55 Yes RIP v2 and static routing NAT / Port Mapping DYN DNS Protocol Yes Yes Local and remote, via the web site IP-GPRS (packet error rate, etc.) HTTP and HTTPS Yes NTP Protocol

Open the catalog to page 1