DHC Digital panel instruments

DHC Digital panel instruments, which, according to the model, display the value of a measured electrical variable or proportional value of a process signal. Devices designed for supervision, regulation and control, using built-in analogue outputs and relays. The DHC series , in terms of scales, transformation ratio, alarm signals, communications, etc., is fully configurable. In AC systems, the device displays electrical parameters such as voltage, current or frequency. In DC systems, the device displays on-screen voltage, current and other industry-related variables. Alternating current models...

Applications The DHC include a driver developed for Circutor's power management software, Power Studio SCADA, which allows the user to interface with the device almost automatically. Via the software, the user can modify device configuration remotely, activate relay outputs, record measured values, generate graphs or tables showing recorded values and use the data to compare it with other variables or calculate efficiency ratios in a simple way. Industrial Applications Photovoltaic Solar Plants Process Control

Models Digital panel indicators are not only used to measure and control electrical parameters but also external variables (normally transmitted via an analogue signal of 0/4...20 mA or 0/2...10 V) needed to calculate efficiency ratios. The DHC , apart from measuring and displaying the values, allow them to be recorded by the user via energy management software, thanks to the Modbus communication protocol. Ammeter Series This range of AC ammeters measures and displays single-phase current and frequency. They have 2 programmable current scales of /1 Aac and /5 Aac. They carry out true root mean...

Universal Power Supply High degree of IP protection Process Indicator Series The current input (mA) indicators measure 0/4...20 mA signals and display the set proportional value. They have 3 programmable current scales of ±20 mA, 0...20 mA and 4...20 mA. A programmable, 3-scale DC current range is also available. It includes versions with a voltage measurement range of ±10 V. DC Voltmeter (shunt) The DC Voltmeter with shunt input (mV) measures mV signals and displays the value proportional to the set primary. It has 10 programmable voltage scales of 50, 60, 75, 100, 150, 200, 250, 300, 400 and...

DHC CPM Digital panel multimeter for DC measurement to supervise photovoltaic installations or charge electric vehicles, as well as enabling simultaneous control and supervision of the installation via the device's builtin analogue output and relays. The DHC CPM , in terms of voltage scale base, shunt primary ratio, alarm signals, communications, etc., is fully configurable. The device measures and displays parameters such as voltage, current, power, energy and amperes consumed or generated per hour (Ah). The DCH-96 CPM 1500 has a direct connection for up to 1500 VDC, especially designed for...

Outstanding features Power Supply Potential free contact RS-485 Modbus/RTU Communications Isolation between circuits Double Isolation Process indicator Process indicator DC multimeter (Hall effect)

Vial Sant Jordi, s/n 08232 Viladecavalls Barcelona (Spain) t. +34. 93 745 29 00 [email protected] C2M263. CIRCUTOR, SA reserves the right to modify any information contained in this catalogue.