DHB Series Panel digital instruments Indication of relay status with LED IP 65 high protection degree Auxiliary power supply Vac / Vdc Compact units, reduced size with many features Alarms with change in colour of the display depending on the value shown Non-linear equations with 21 reference points

Technical features Protection Protection degree IP 65 (front panel) IP 10 (rear) Environmental conditions Relative humidity Maximum altitude Designed for CAT III 300/520 Vac installations, in accordance with EN 61010. Double-insulated electric shock protection, class II References Variables Impulses, frequency, circular speed, periods, time, encoder Outputs 1 relays 3 relays + 1 analogue + RS-485 Power supply 85... 253 Vac/dc 20...40 Vac/dc 4 relays + 1 analogue + RS-485 2 relays 4 relays + 1 analogue + RS-485 2 relays 4 relays + 1 analogue + RS-485 85... 253 Vac/dc Pt100/500/1000 Thermocouple...

DHB series Digital instruments Technology for energy efficiency

DHB Series Panel digital instruments which display on-screen, depending on the model, the value of a measured electrical variable or the proportional value of a process signal. Designed for supervision, regulation and control, through the use of analogue outputs and relays, integrated in the unit. The DHB series enables full configuration of scales, transformation ratio, alarm setpoints, changes in colour of the display, communications, etc. Depending on the model, the unit shows the electrical parameters of a single-phase installation, such as voltage, current, frequency, power, cos φ, etc....

DHB-102/124 Impulse, frequency and time meter »» Measurement of number of impulses, frequency, circular speed, working time. »» 2 impulse meters, compatible with market encoders. »» Measurement of instantaneous values and incremental variables meter. »» 4 outputs* available for alarms and LED indication. »» Analogue output of 0(4)...20 mA or 0...10 V.* »» Modbus/RS-485 communications.* »» Current or voltage measurement (1 or 5 Ad.c. / 100 or 500 Vd.c. »» Storage of maximum and minimum values of all parameters measured. »» 4 outputs* available for alarm with LED indication. »» Analogue output...

»» Measurement of electrical parameters of a single-phase network. (1 or 5 Aa.c. / 100 or 400 Va.c.) »» Storage of maximum and minimum values of all parameters measured. »» 4 outputs* available for alarms and LED indication. »» Analogue output of 0(4)...20 mA or 0...10 V.* »» Modbus/RS-485 communications.* DHB-402/424 Indicator for industrial process, temperature and resistor signals »» Measurement of process, temperature and resistor signal. (0...10 V, 0/4...20 mA, 0...60 mV) »» Stores max. and min. values of the parameters measured. »» Auxiliary power supply for transducers. »» The unit enables...