Catalogs >
CIRCUTOR >
computer Smart

computer Smart
2Pages

Catalog excerpts

Automatic power factor regulators computer SmartAutomatic power factor regulator Supply circuit Power supply voltage Tolerance Consumptions Frequency Measurement circuit Voltage measurement range Current measurement (In) Leakage current Leakage current range Transformers type Full scale at secondary side Measuring circuits accuracy 1 % Temperature measurement Output Contact type Poder de corte Alarms No. Alarm Communications Hardware Protocol Baud rate Operating conditions Temperature Relative humidity Maximum altitude Control system FCP (a programme that minimises the number of operations) Safety Computer Smart is a leading edge power factor regulator, providing in a single device the functions of power factor correction, power analyzer and leakage current protection. The regulator is equipped with the latest world technology, which allows CIRCUTOR offering to the market a simple regulator, but capable of performing many advanced functions as: Capacitors status monitoring, earth leakage current monitoring, capacitors failure prevention, overheating detection, etc.. All these functions contribute to a longer life and a better power quality, and avoid intempestive supply interruptions. Because all the above features, the Smart becomes one of the PF regulators with the best performance, while still offering users an easy use and intuitive programming. Computer Smart offers a complete system for facilities that requires PF correction, security, measure, communications and monitoring. Its simple and intuitive programming system enable de user the installation and maintenance. 480, 400, 230, 110 V a.c. depending on model + 15 % -10 % 8,2 VA (0 relays connected) 9,3 VA (6 relays connected) 11 VA (12 relay connected) 45 ... 65 Hz 480, 400, 230, 110 V a.c. depending on model By means of a current transformer In /5 Change over contact Vmax 250 V a.c., 4 A a.c., AC1 14, totally configurables RS-485 Modbus 9600, 19200, 38400 Bd, configurable -20 ... +60 °C Max. 95% 2000 m Insulation Degree of protection Standards IEC 62053-23 (2003-01) Ed. 1.0, IEC 61326-1, EN61010-1, UL 508 (* optional)

Open the catalog to page 1