
Overview: The SURVEYOR PLUS™ is a multiparameter environmental condition monitor designed to provide continuous surveillance and rapid detection of environmental deterioration that could damage sensitive equipment. It measures humidity, temperature, and corrosion rates using replaceable thin-film sensors for copper and silver, corresponding to ISA environmental classifications.
Features: The system offers high-sensitivity corrosion rate measurement, digital and analog outputs, and optional datalogging. It is suitable for use in various environments such as refineries, chemical plants, and clean rooms.
Specifications:
Ordering Information: The system can be ordered with or without a differential pressure transmitter and datalogging software. Power options include customer-supplied 24 Volt DC or wall transformers for 115 or 230 Volt.
Recommended Accessories: A test sensor kit is available to verify the functionality of the ECM and sensor condition. Replacement sensors for copper, silver, iron, and nickel are also available.
SURVEYOR PLUS™ Environmental Condition Monitor Silver & Copper Corrosion Sensors Features: • Corrosion Rate, Relative Humidity, Monitors Temperature, and Differential Pressure • High-Sensitivity Corrosion Rate Measurement • Corrosion Rate of Copper and Silver Sensors Corresponds to ISA Classification of Environments • Digital and Analog Outputs • Optional Datalogging The SURVEYOR PLUS™ is a multiparameter monitoring system providing constant surveillance of the environment and rapid detection of any deterioration that could result in damage to expensive equipment and valuable assets. Early detection of humid, high temperature, or corrosive conditions will permit corrective action to be taken before substantial damage occurs to sensitive computer and instrumentation systems or electrical equipment. correspond to the ISA classification of environments (G1 through GX) for copper and silver. The system measures humidity, temperature, and the corrosive attack on two replaceable thin-film sensors. The corrosion rate is shown by indicator lights that The SURVEYOR PLUS™ is particularly useful for environmental monitoring in refineries, chemical plants, pulp and paper plants, control rooms, computer rooms, museums, and clean rooms. Analog and/or digital outputs of corrosion, humidity and temperature information provides remote alarming, display and recording. The information may also be stored in the on-board data-logger, and accessed via PC software. The system can also be used as a highsensitivity corrosion monitor for special applications.
Open the catalog to page 1Specifications: Measured Parameters • Corrosion: Two independent channels • Corrosion Rate: Rate time period user selectable: 8-99 hrs. • ISA Classification: G1 through GX • Temperature: +32° F to +122° F or 0° C to +50° C • Humidity: 10% to 95% RH 8” • Differential Pressure: Optional differential pressure transmitter range - Standard Resolution 0-2 i.w.g. range with 0.1” resolution - Higher Resolution 0-0.5 i.w.g. range with 0.01” resolution Sensors 2,500 Å nominal span (life). One copper and one silver provided with instrument. Other materials available by special order. Displays LCD display...
Open the catalog to page 24 Pages
2 Pages
2 Pages
24 Pages
6 Pages
4 Pages
8 Pages