FRONT ACCESS FILTRATION SYSTEM Circul-Aire's MC Cell design combines both particulate filters and dedicated removable media modules within a stationary frame to provide continuous air filtration for the highest possible removal efficiency of airborne contaminants. The air filter assembly is available for front access applications in field assembled banks where side access loading is restricted. Engineered for flexibility, MC Cells can be used in new or existing applications for light or heavy contaminant loading, in single or multi-pass, intake, exhaust, or recirculation air systems. MULTIPLE APPLICATIONS Remove a wide variety of odors and gases with chemical media selected to meet the specific needs of each application. CONTINUOUS FILTRATION Protect the indoor environment by eliminating many of the harmful contaminants found in deficient outdoor air. ENERGY EFFICIENCY Reduce the amount of outdoor air required for dilution and realize substantial savings in air conditioning costs. For acceptable indoor air quality, most building codes and standards recommend minimum ventilation rates of outdoor air. However, when outdoor air is of deficient quality, the indoor environment is put at risk, and appropriate air cleaning systems should be used. By providing total filtration on the outdoor air side of a building's ventilation system, the MC Cell assembly will guarantee maximum protection against harmful outdoor air contaminants like jet exhaust fumes, automobile/diesel exhaust, sulfur oxides, nitric oxides, and ground level ozone. Conversely, when outdoor air is of acceptable quality, the cost of conditioning this air can be excessive. Fortunately, the amount of outdoor air normally required for dilution can be reduced if proper air cleaning methods are applied. By positioning the MC Cell assembly on the return air side of a building's ventilation system, and filtering any contaminants generated within the space, a portion of that air can be recirculated. The amount of clean air which is recirculated, reduces the amount of outdoor air required for dilution. The result of this ventilation strategy is clean air and substantial energy savings.

24” Circul-Aire Multi-Mix® Media MM-18 Media Holding Modules Circul-Aire Multi-Mix Media cul-Aire Multi-Mix® MM-18 Media Holding Modules 30% Efficienc Pre-Filter Efficiency FULL MC CELL NOTE: Dimensions are in inches. Drawing is not to scale. G ENERAL S PECIFICATIONS 1.0 FM-FRAME The FM-Frame shall be constructed of 16 ga. zinc coated steel complete with flush mitered and welded corners. Slide tracks shall be incorporated into the housing design to ensure maximum sealing integrity of the media holding modules (MM-18). Closed cell neoprene gasketing shall be used on all housing surfaces in contact...