STD-601
1Pages

Catalog excerpts

Narrowband radio transceiver The STD-601 434 MHz is a miniature 434 MHz band transceiver designed for industrial remote control applications. This module conforms to the EN 300 220 standard. The STD-601 434 MHz has a simple serial interface and allows own communication protocol to be used. The RF power, data rate and channel can be set through the use of dedicated serial commands. ・ Small 20 x 32 x 5 mm SMD ・ Low current consumption - 26 mA (TX 10 mW) - 19 mA (RX) ・ Transparent interface for data input and output ・ CE / UKCA marking Applications ・ Industrial telecontrol ・ Telemetry systems Applicable standard Communication method Simplex, Half duplex Emission type Frequency stability Supply voltage Supply current Operating temperature Transmitter part Spurious emission < -54 dBm (47 to 74, 87.5 to 118, 174 to 230, 470 to 862 MHz) < -37 dBm (Other frequencies below 1000 MHz) < -30 dBm (Frequencies above 1000 MHz) Adjacent channel leakage power Receiver part Adjacent channel selectivity UART 9,600 / 19,200 / 38,400 bps Data length: 8 bit, Parity: None, Stop bit: 1 * Unless otherwise specified, specifications are typical values obtained under 9,600 bps, 10 mW, 25 C, 434 MHz, 3 V *1 Possible but operation in line with specifications cannot be guaranteed Specifications are subject to change without prior notice Sales Division 7557-1 Hotaka, Azumino, Nagano 399-8303, Japan Tel:+81-(0)263-82-1024 Fax:+81-(0)26

Open the catalog to page 1

STD-601 1Pages

Catalog excerpts

All Circuit Design catalogs and technical brochures

STD-601
1Pages