STD-601 400 MHz

STD-601 400 MHz

Product catalog summary
General Overview
The STD-601 400 MHz is a compact transceiver designed for industrial applications, operating within the 400 MHz frequency range and compatible with ISM bands across various countries. It features a simple serial interface and supports custom communication protocols. Key parameters such as RF power, data rate, and channel selection can be configured via serial commands.
Applications
  • Industrial remote control systems
  • Telemetry systems
Key features include a small form factor (20 x 32 x 5 mm) and selectable frequency bands: 429 MHz (Japan), 434 MHz (EU), 447 MHz (Korea), and 458 MHz (UK). The maximum RF power output is 50 mW, and it provides a transparent interface for data input and output.
Features
  • Narrowband radio transceiver
  • Maximum RF power: 50 mW
  • Spurious emission: < -54 dBm for specified frequency ranges
  • Adjacent channel leakage power: < -37 dBm for channels with 25 kHz bandwidth
Interface
  • Data Interface: Digital L = GND, H = Vcc (Asynchronous)
  • Command Interface: UART with speeds of 9,600 / 19,200 / 38,400 bps
  • Data length: 8 bit, Parity: None, Stop bit: 1
Receiver Specifications
  • Sensitivity: -113 dBm at 9,600 bps, -117 dBm at 4,800 bps
  • Adjacent channel selectivity: > 50 dB
  • Blocking: > 70 dB
Technical Specifications
  • Communication method: Simplex, Half duplex
  • Emission type: F1D (2-GFSK)
  • Frequency range: 429.1750 to 459.1750 MHz across different bands
  • Number of RF channels: 137
  • Frequency stability: +/-3 ppm
  • RF bit rate: 1,200 to 19,200 bps
  • Supply voltage: 3.0 to 5.0 V
  • Supply current: 35 mA (TX 10 mW), 58 mA (TX 50 mW), 19 mA (RX)
  • Operating temperature: -20 to +65 C
  • Dimensions: 20 x 32 x 5 mm
  • Weight: 4.5 g
Additional Information
Specifications are subject to change without prior notice. The document version is 1.6, dated August 2022. For more information, contact Circuit Design, Inc. in Nagano, Japan.
See more

Catalog excerpts

STD-601 400 MHz-1

Narrowband radio transceiver The STD-601 400 MHz is a miniature transceiver designed for industrial applications. This module has selectable bands in a wide frequency range in the region of 400 MHz, conforming to the ISM bands in various countries. The STD-601 400 MHz has a simple serial interface and allows own communication protocol to be used. The RF power, data rate and channel can be set through the use of dedicated serial commands. ・ Small 20 x 32 x 5 mm SMD ・ Selectable bands possible within wide frequency range. - 429 MHz (Japan) / 434 MHz (EU) - 447 MHz (Korea) / 458 MHz (UK) ・ Maximum RF power 50 mW ・ Transparent interface for data input and output ・ Industrial remote control systems ・ Telemetry systems Communication method Simplex, Half duplex Emission type 429.1750 to 429.7375 MHz (429 MHz band 47 ch) 433.0750 to 434.7750 MHz (434 MHz band 137 ch) 447.2750 to 447.9875 MHz (447 MHz band 59 ch) 458.5000 to 459.1750 MHz (458 MHz band 28 ch) Supply voltage Supply current Operating temperature Transmitter part Frequency stability Spurious emission < -54 dBm (47 to 74, 87.5 to 118, 174 to 230, 470 to 862 MHz) < -37 dBm (Other frequencies below 1000 MHz) < -30 dBm (Frequencies above 1000 MHz) Adjacent channel leakage power Receiver part Adjacent channel selectivity UART 9,600 / 19,200 / 38,400 bps Data length: 8 bit, Parity: None, Stop bit: 1 * Unless otherwise specified, specifications are typical values obtained under 9,600 bps, 10 mW, 25 C, 434 MHz, 3 V *1 Possible but operation in line with specifications cannot be guaranteed Specifications are subject to change without prior notice Sales Division 7557-1 Hotaka, Azumino, Nagano 399-8303, Japan Tel:+81-(0)263-82-1024 Fax:+81-(0)26

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.