Radio solutions for industrial applications worldwide LOW-POWER RADIO MODULES Product Data Sheets Competence in radio solutions

Selection guide Data Transmitter / Receiver Model Parameter Data Transceiver Model Parameter Interface Serial data UART command Channel number Data rate Data rate Supply voltage Supply current ** Supply current ** * Values vary by frequency band. Check product details. ** Typical values at maximum RF output power unless otherwise noted. *** Power selectable. Check product details. Data Transmitter / Receiver Model Parameter Data Transceiver Audio Model Regulation 2.4 GHz ● : Pre-certified module　○ : Uncertified　＊ : Receiver category 1 compliance　** : FCC a

UHF Narrowband Multi Channel Transmitter and Receiver The unique and compact CDP-TX-02E and CDP-RX-02E are frequency selectable radio data modules for the 434 MHz ISM band. Both CDP-TX-02E and CDP-RX-02E are equipped with a frequency synthesizer system including a microcontroller. 32 RF channels are selectable using an onboard 4-bit DIP switch. Its small size, low voltage operation and frequency selectability make it ideal for various applications in sites where many radio transmitters are operated. The CDP-TX-02EP and CDP-RX-02EP are channel selectable using an 8 pin terminal allowing you to...

UHF Narrowband Multi Channel Transmitter and Receiver The unique and compact CDP-TX-02F and CDP-RX-02F are frequency selectable radio data modules for the 434 MHz ISM band. Both CDP-TX-02F and CDP-RX-02F are equipped with a frequency synthesizer system including a microcontroller. 128 RF channels are selectable using an onboard 7-bit DIP switch. Its small size, low voltage operation and frequency selectability make it ideal for various applications in sites where many radio transmitters are operated. Applicable standard Communication method Emission type Channel spacing Channel selection method...

UHF Narrowband Transmitter and Receiver CDP-TX-07M, CDP-RX-07M 434 MHz The CDP-TX-07M and CDP-RX-07M 434 MHz are low power narrowband FSK transmitter and receiver modules designed for industrial applications operating in the 434 MHz ISM band. The modules contain most of the components necessary for radio transmission in a compact housing. The RF channel can be selected from 4 preset channels using jumpers. The receiver is double superheterodyne and contains a SAW filter, ensuring high sensitivity and selectivity for stable long range communication. The CDP-TX-07MP and CDP-RX-07MP 434 MHz are...

UHF Narrowband Transmitter and Receiver CDP-TX-07M, CDP-RX-07M 869 MHz The CDP-TX-07M and CDP-RX-07M 869 MHz are low power narrowband FSK transmitter and receiver modules designed for industrial applications operating in the 869 MHz ISM band. The modules contain most of the components necessary for radio transmission in a compact housing. The RF channel can be selected from 4 preset channels using jumpers. The receiver is double superheterodyne and contains a SAW filter, ensuring high sensitivity and selectivity for stable long range communication. The CDP-TX-07MP and CDP-RX-07MP 869 MHz are...

Narrowband radio transceiver The STD-601 434 MHz is a miniature 434 MHz band transceiver designed for industrial remote control applications. This module conforms to the EN 300 220 standard. The STD-601 434 MHz has a simple serial interface and allows own communication protocol to be used. The RF power, data rate and channel can be set through the use of dedicated serial commands. ・ Small 20 x 32 x 5 mm SMD ・ Low current consumption - 26 mA (TX 10 mW) - 19 mA (RX) ・ Transparent interface for data input and output ・ CE / UKCA marking Applications ・ Industrial telecontrol ・ Telemetry systems Applicable...

Narrowband radio transceiver The STD-601 400 MHz is a miniature transceiver designed for industrial applications. This module has selectable bands in a wide frequency range in the region of 400 MHz, conforming to the ISM bands in various countries. The STD-601 400 MHz has a simple serial interface and allows own communication protocol to be used. The RF power, data rate and channel can be set through the use of dedicated serial commands. ・ Small 20 x 32 x 5 mm SMD ・ Selectable bands possible within wide frequency range. - 429 MHz (Japan) / 434 MHz (EU) - 447 MHz (Korea) / 458 MHz (UK) ・ Maximum...

UHF Narrowband Multi Channel Transceiver The UHF FM narrowband semi-duplex radio module STD-302Z 434 MHz is suitable for industrial remote control and telemetry applications operating in the 434 MHz ISM band. The SAW filter and narrowband technique provides reliable data communication in industrial applications where interference rejection and practical distance range is required. Suitable for feedback systems. 10 mW RF power Programmable RF channel Receiver sensitivity -119 dBm Excellent vibration and shock resistance / Mechanical durability FSK narrowband CE / UKCA marking 419 MHz (China) /...

UHF Narrowband Multi Channel Transceiver LMD-401 458 to 462.5 MHz is a synthesized multi channel transceiver module designed to meet FCC Part 90 and ISED RSS-119 for the US market and Canada respectively. This small, highly integrated and fully shielded module is designed for embedding in user equipment. The module is suitable for various low power industrial telecontrol and telemetry applications. FCC and ISED compliant 458.0 to 462.5 MHz band Programmable RF channel with 12.5 kHz channel space 10 mW, GFSK 4,800 bps Low power operation 3.0 to 5.5 V, 46 mA (TX), 36 mA (RX) Small size 50 x 30...

DSSS low power radio transceiver The STD-503 is a 2.4 GHz transceiver enclosed in a small compact shield casing designed for industrial applications. The transceiver uses Direct Sequence Spread Spectrum (DSSS) modulation and true diversity circuit, enabling reliable communications even in the congested 2.4 GHz band. The STD-503 complies with the European EN 300 440, U.S FCC Part 15.247, Canadian ISED RSS-210 and Japanese ARIB STD-T66 standard, making it ready for the global market. The transceiver uses a transparent data interface to enable users to communicate using their own protocols. The...