NK-2.4Y

NK-2.4Y

Product catalog summary
General Specifications
  • Applicable Standards: FCC Part 15, ISED RSS-247, ARIB STD-T66, EN 300 440
  • Communication Method: Half duplex (for ACK purposes only)
  • Communication Range: 100 m (Line of sight)
  • Frequency: 2403 to 2479 MHz (Frequency Hopping)
  • Operating Temperature: -30 to +65°C
  • Antenna: Internal pattern antenna or specified external antennas
  • Supply Voltage: 2.2 to 5.5 V
  • Input/Output Response: 30 to 60 ms
  • Communication Bit Rate: 250 kbps
  • Hamming Distance: 6
  • Dimensions: 35.3 x 17.8 x 3.5 mm
  • Weight: 3.2 g
  • Soldering Conditions: Hand soldering (Soldering iron temp: 350°C within 3 sec)
Features
  • Telecommand radio module operating in the 2.4 GHz band
  • Original frequency hopping protocol for simultaneous multi-module use
  • Fast input-output response time of 20 ms
  • Transmission of up to 8 switch inputs/outputs
  • Link signal output for connection status
  • Low power consumption with a communication range of 100 m
  • Conformity with FCC, ISED, CE, UKCA, and ARIB
  • 1:1 communication mode
  • CRC-16 error detection
  • Hamming distance of 6 to minimize malfunction
Applications
  • Remote tail lifts on trucks
  • Remote control of care lifts on welfare vehicles
  • Shutter open and close
Technical Specifications
  • RF Output Power: 1.4 mW (+20%, -80%)
  • Supply Current: 3 mA average
  • Inputs: 8 switch inputs
  • Input Voltage Range: -0.3 V to REG + 0.3 V (REG = Internal voltage 2.058 to 2.142 V)
  • Input Voltage Threshold: Low Level: 0.4 V (max), High Level: 1.7 V (min)
  • Outputs: 8 switch outputs
  • Output Voltage Range: 0.3 V to REG + 0.3 V
  • Output Voltage Threshold: Low Level: 0.9 V (max), High Level: 1.1 V (min)
  • Output Holding Time: 400 ms typical when communication is shut off
See more

Catalog excerpts

NK-2.4Y-1

Telecommand radio module The NK-2.4Y is an embedded input / output radio module which operates in the 2.4 GHz band. In spite of its small size and low power consumption, it achieves a communication range of 100 m (line of sight). Our original frequency hopping protocol allows multiple modules to be used in one area simultaneously without concern about radio channels. With a fast input-output response time of 20 ms, a maximum of 8 switch inputs / outputs can be transmitted. Regarding an antenna, customers can select either internal PCB antenna or external antenna specified by Circuit Design. Link signal output shows connection status, which helps the user to stay within the signal coverage area. ・ FCC, ISED, CE, UKCA and ARIB conformity ・ Module can be set to either input or output mode. ・ CRC-16 error detection Achieves a Hamming distance of 6 to minimize malfunction ・・ ・ Transmission of max 8 switching signals by connecting simple external circuitry ・ Low current consumption ・ Rapid two way communication for confirmation of communication link status. ・ 1:1 communication only ・ Frequency hopping allows multiple systems in one area without concern about channel management Applications ・ Remote tail lifts on trucks. ・ Remote control of care lifts on welfare vehicles ・ Shutter open and close Applicable standard FCC Part 15 / ISED RSS-247 ARIB STD-T66 / EN 300 440 Communication method Communication mode 1:1 (Input mode: Output mode) Operating temperature Internal pattern antenna or specified external antennas Supply voltage Input / Output response Hamming distance Soldering conditions Half duplex (for ACK purposes only) Communication range Hand soldering (Soldering iron temp: 350 C within 3 sec) Supply current Input voltage range Input voltage threshold Input mode Low Level: 0.4 V (max) High Level: 1.7 V (min) Output mode Supply current When linked: 7 mA ave. During linking: 14 mA ave. Output voltage range Output voltage threshold Low Level: 0.9 V (max) High Level: 1.1 V (min) Output holding time when communication shutoff Specifications are subject to change without prior notice Sales Division 7557-1 Hotaka, Azumino, Nagano 399-8303, Japan Tel:+81-(0)263-82-1024

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.