Low power radio modules

Product catalog summary

Overview: This document provides technical specifications and applications for various UHF narrowband radio modules, including models such as CDP-TX-07M, CDP-RX-07M, and others. These modules are used in sectors like industrial plants, energy utilities, agriculture, security, communications, museums, and transportation.

Specifications:

Frequency: Modules operate at frequencies including 434 MHz, 429 MHz, 863 MHz, and 2.4 GHz.
RF Power: Options range from 1 mW to 50 mW, depending on the model.
Data Rate: Varies from 1,200 bps to 19,200 bps.
Receiver Sensitivity: Ranges from -115 dBm to -120 dBm.
Power Consumption: Transmission (TX) power consumption ranges from 18 mA to 60 mA, while reception (RX) ranges from 17 mA to 55 mA.
Dimensions: Module sizes vary, with examples like 22 x 12 x 4.5 mm for TX and 36 x 26 x 8 mm for RX.

Procedures and Features:

Channel Selection: Channels can be changed using dip switches or pins, depending on the model.
Communication Interface: Command interface via UART is available for some models.
Error Correction: Some models include error correction using Reed Solomon code.
Compliance: Modules comply with standards such as RED (EN 300 220), FCC Part 15, and others.

Applications: These modules are suitable for telecommand, data transmission, and audio transmission in various environments, offering features like long-range communication, multi-channel support, and built-in noise reduction systems.

Key Models:

CDP-TX-07M/RX-07M: 434 MHz, 4 channels, RF 10 mW, 4,800 bps.
SLR-434M: Long-range, 434 MHz, RF 10 mW, 137 channels.
STD-601: Covers multiple bands, RF up to 50 mW, 137 channels.
STD-503: 2.4 GHz, true diversity receiver, 77 channels.
WA-TX-03S/RX-03S: 863-865 MHz, audio module, built-in noise reduction.

Catalog excerpts

Applications Telecommand Agriculture Industrial Plants Energy Utilities Telecommand radio unit Data transmitter and receiver UHF narrowband multi channel radio module UHF narrowband multi channel radio module Transmit 6 switching signals CRC-16 error detection / Hamming distance 6 1:1 communication RF 1.6 mW FHSS 30 mA max (KST2.4S), 80 mA max (KSR2.4) 55 x 45 x 12.5 mm FCC Part 15 and ARIB STD-T66 Channel change using dip switch or pin depending on model RF 10 mW / 1 mW selectable 4,800 bps 25 kHz step Receiver sensitivity* -120 dBm 43 mA (TX 10 mW), 30 mA (RX) 36 x 26 x 10 mm (TX) 50 x 30 x 9 mm (RX) RED (EN 300 220) Channel change using dip switch RF 10 mW / 1 mW selectable 4,800 bps 12.5 kHz step Receiver sensitivity* -120 dBm 43 mA (TX 10 mW), 30 mA (RX) 36 x 26 x 10 mm (TX) 50 x 30 x 9 mm (RX) RED (EN 300 220) UHF narrowband telecommand radio module Telecommand radio module Transmit 8 switching signals CRC-16 error detection / Hamming distance 6 1:1 communication RF 1.4 mW FHSS 3 mA (Input), 7 mA (Output), 14 mA (linking) 35.3 × 17.8 × 3.5 mm EN 300 440 / FCC Part 15 / ISED RSS-247 / ARIB STD-T66 Transmit 6 switching signals N:1 communication Photo MOSFET outputs RF 10 mW 4 channels 27 mA (TX), 19 to 55 mA (RX)*1 36 × 26 × 8 mm (TX), 53 × 35 × 12 mm (RX) 426 MHz version available *1: varies according to the number of outputs UHF narrowband radio module CDP-TX-07M, CDP-RX-07M CDP-TX-07MP, CDP-RX-07MP Channel change using dip switch or pin depending on model RF 10 mW 4,800 bps Receiver sensitivity* -120 dBm 20 mA (TX), 23 mA (RX) 22 x 12 x 4.5 mm (TX) 36 x 26 x 8 mm (RX) RED (EN 300 220) UHF narrowband radio module Channel change using dip switch or pin depending on model RF 5 mW 4,800 bps Receiver sensitivity* -115 dBm 18 mA (TX), 23 mA (RX) 22 x 12 x 4.5 mm (TX) 36 x 26 x 8 mm (RX) RED (EN 300 220) Radio data modem (Embedded protocol) UHF narrowband radio modem Data transceiver UHF narrowband multi channel radio module Programmable channels RF 10 mW 9,600 bps Receiver sensitivity* -119 dBm 44 mA (TX), 28 mA (RX) 50 × 30 × 9 mm 419 / 429 / 447 / 458 / 869 MHz versions available UHF narrowband multi channel radio module UHF narrowband radio modem Long range - few km or more Command interface / UART Transmit 8 switching signals RF 10 mW 4,800 bps (FSK), 15 to 245 bps (LoRa) 137 channels with 12.5 kHz step 29 mA (TX), 17 mA (RX) 40 × 29 × 6.2 mm RED (EN 300 220) 429 MHz version available Command interface / UART Error correction (Reed solomon code) RF 10 mW / 1 mW selectable 4,800 bps 127 channels with 12.5 kHz step 42 mA (TX 10 mW), 22 mA (RX) 36 × 26 × 8 mm RED (EN 300 220) 429 MHz version available Programmable channels RF 10 mW 4,800 bps Receiver sensitivity* -116 dBm 46 mA (TX), 36 mA (RX) 50 × 30 × 9 mm FCC Part 90.217 / ISED RSS-119 Audio transmitter and receiver UHF narrowband multi channel radio module DSSS low power radio module True diversity receiver Channel step option RF 10 mW 19,200 bps 77 channels (DSSS) 48 mA (TX), 55 mA (RX) 40 × 29 × 5.5 mm EN 300 440 / FCC Part 15.247 / ISED RSS-210 / ARIB STD-T66 UHF multi channel wireless audio module WA-TX-03S, WA-RX-03S 863 to 865 MHz European audio band Easy installation for user system Built in noise reduction systems Built in mute circuit RF 10 mW / 5 mW selectable 60 mA (TX 10 mW) , 45 mA (RX) 15 channels with 125 kHz step 36 x 26 x 8 mm (TX, RX) RED (EN 301 357)

Open the catalog to page 1

Low power radio modules

Low power radio modules

Catalog excerpts

All Circuit Design, Inc. catalogs and technical brochures