The KST2.4S and KSR2.4 are telecommand units that allow the transmission and reception of upto 6 switching signals in the 2.4 GHz band. The CRC-16 error detection achieving a Hamming distance of 6 allowing for reliable switching signal transmission. Frequency hopping minimises interference from other radio systems on the 2.4 GHz band. There is no need to manage any channels and multiple operation in the same area is possible. In addition, communication with separate NK-2.4Y telecommand radio module is possible. Both KST2.4S and KSR2.4 display a LINK LED allowing the user to monitor communication status. The units have a wide operating voltage range of 6 to 24 V. 6 inputs (KST2.4S) / 6 outputs (KSR2.4) 3 output operation modes (One-shot, Toggle, Momentary) 1:1 communication with KST2.4S and KSR2.4 Includes a wiring harness to allow easy interface to user equipment. FCC and ARIB conformity RF module (NK-2.4Y) included. ・ Remote control applications ・ Start / Stop control for motor operated equipment ・ Monitor and alarm system with threshold level control for sensors 100 m (Line of sight) 1:1 (Input mode: Output mode) Hamming distance Input / Output response Operating temperature Supply voltage Number of Input / Output Input 6, Link output 1 Input circuit Supply current Output Unit Half duplex (for ACK purposes only) Communication mode FCC Part 15 / ARIB STD-T66 (NK-2.4Y included) Communication range Input Unit Applicable standard Communication method Output 6, Link output 1 Output relay Supply current 80 mA max (All output ON, No load) Specifications are subject to change without prior notice Sales Division 7557-1 Hotaka, Azumino, Nagano 399-8303, Japan Tel:+81-(0)263-82-1024 Fax:+81-(