DN80
DN80
The document outlines the product range DN 80 - 3”, which can be standard or customized. Key specifications include an exchange area of 0.273 m², width of 320 mm, height of 1071 mm, and a connections diameter of DN80 3”. The channel capacity is 0.68 liters, and the plate weight with gasket is 1.321 kg. The maximum water flow rate is 110 m³/h, and the maximum working pressure options are 10, 16, and 25 bar.
Dimensions and Design
Frame dimensions and connection designs are provided, with all dimensions in millimeters. The document includes detailed measurements for various configurations and the number of plates (Np) ranging from 41 to 251.
Materials
The materials used include AISI 304, AISI 316L, 254 SMO, and Titanium for plates, with gaskets made from NBR, EPDM Prx, FPM, and HNBR. Frames are available in carbon steel and stainless steel. Maximum temperature ratings for gaskets are specified, with NBR up to 110 °C, EPDM Prx up to 160 °C, FPM up to 200 °C, and HNBR up to 160 °C.
Certifications
The product complies with several certifications, including ISO EN 9001:2015, PED 2014/68/UE, ACS, WRAS, ISO 14001, and OHSAS 18001.
Additional Information
The document notes that all data and drawings are subject to change without notice and are not binding. For non-standard configurations, contact information is provided.
Catalog excerpts
GAMMA PRODOTTI / PRODUCT RANGE DN 80 - 3” Standard o Personalizzabili Standard or Customized
Open the catalog to page 1
Gamma Prodotti Product Range Diametro connessioni Connections diameter Peso piastra (con guarnizione) [Kg]* Plate weight (with gasket) [Kg]* Corrugation angle PS=> Pressione max di esercizio [bar] PS=> Max working pressure [bar] Tutti i dati e disegni nel presente documento possono subire variazioni senza preavviso e non sono vincolanti per il produttore. All data and drawings herewith described can be changed without prior notice and are not binding for the manufactu
Open the catalog to page 2
DIMENSIONI TELAI / FRAMES DIMENSIONS Ingombro delle connessioni (C) / Connections dimensions (C) A-A B-B U-U Tutte le dimensioni sono in mm - Np = numero di piastre. All dimensions are in mm - Np = number of plates.
Open the catalog to page 3
DISEGNI DEGLI ATTACCHI / CONNECTIONS DESIGN DN 80 - 3" CONNESSIONI FLANGIATE ISO ISO STUDDED PORTS A/B/U CONNESSIONI FLANGIATE ANSI ANSI STUDDED PORTS ANCORAGGIO A TERRA (G) / GROUND ANCHORING (G) Tutte le dimensioni sono in mm. All dimensions are in mm.
Open the catalog to page 4
MATERIALI / MATERIALS Piastre Plates 254 SMO Titanio / Titanium NBR EPDM Prx. Guarnizioni Gaskets FPM HNBR Acciaio Carbonio / Carbon steel Telai Frames** Acciaio inox / Stainless steel Attacchi Connections ** A / C (Rubber lined) B / E (AISI316L lined) U / V (Unlined) Materiali guarnizioni e temperature massime Gaskets material maximum temperatures NBR *Le temperature devono essere considerate non applicabili in tutte le condizioni di lavoro. The temperatures must be considered not applicable in all working conditions. ** Per configurazioni non standard contattateci. For non-standard configurations...
Open the catalog to page 5
ESPLOSO COMPONENTI MODELLI / COMPONENT BLOW-UP DRAWINGS MODELS S270+ Follower frame support Supporto piastrone mobile Column Appoggio posteriore Follower frame Piastrone mobile Plate pack Pacco piastre Top guiding bar Guidapiastre superiore Gasket Manichette Head frame Piastrone fisso Bottom guiding bar Guidapiastre inferiore Feet (optional) Staffe ancoraggio (optional) CERTIFICATIONS APPROVALS • ACS Attestation de Conformité Sanitaire • OHSAS 18001 Occupational Health and Safety • WRAS EPDMprx gasket compound approved • PED 2014/68/UE Pressure Equipment Directive Module B,D1 & D (up to Risk...
Open the catalog to page 6All Cipriani PHE srl catalogs and technical brochures
ACCESSORIES EN9 Pages
DN2006 Pages
DN1506 Pages
DN1008 Pages
DN656 Pages
DN506 Pages
DN326 Pages
General Brochure17 Pages
