*mydirectindustry

COMPONENT GEARING

Product catalog summary

Machining Capabilities Overview

Tooth Grinding: Capable of handling external diameters ranging from 0.75" to 63" and internal diameters from 5.0" to 55". Diametral pitch varies from 16 NDP to 0.75 DP, with a maximum face width of 39" and a helix angle of up to 450 degrees.

Milling: The X-axis ranges from 41.5" to 200", Y-axis from 20" to 60", and Z-axis from 26" to 40".

Hobbing: Handles outer diameters from 0.5" to 149" and diametral pitches from 64 NDP to 1.5 NDP, with a maximum face width of 54" and a helix angle of 450 degrees.

OD/ID Surface Grinding: External grinding supports a maximum outer diameter of 42" and length of 96". Internal grinding supports diameters from 0.75" to 32" and bore lengths up to 13.5".

Gear Shaping: Internal shaping capabilities range from 2" to 55" with diametral pitches from 24 NDP to 2 NDP and a maximum face width of 9.4".

Turning: Supports outside diameters up to 106.3", maximum height of 79", shaft outside diameters up to 32", and shaft lengths up to 144".

Quality Standards: Adheres to AGMA 2000 Q13, ISO 1328 A4, ISO 9001:2015, and IATF 16949:2016 standards.

Catalog excerpts

MACHINING CAPABILITIES TOOTH GRINDING External Diameter Min. .75" Max. 63" Internal Diameter Min. 5.0" Max. 55" Diametral Pitch Min. 16 NDP Max. .75 DP Max. Face Width 39" Max. Helix Angle 450+/MILLING Max. X Axis Min. X Axis Max. Y Axis Min. Y Axis Max. Z Axis Min. Z Axis HOBBING Min. OD Max. OD Min. NDP Max. NDP Max. Face Width Max. Helix Angle OD/ID SURFACE GRINDING External Max. OD 42" Max. Length 96" Internal Min. OD .75" Max. OD 32" Min. ID .5" Max. ID 24" Bore Length 13.5" GEAR SHAPING Max. Internal Min. Internal Max. NDP Min. NDP Max. Face Width TURNING Outside Dia. Max. Height Shaft...

Open the catalog to page 2

COMPONENT GEARING

COMPONENT GEARING

Catalog excerpts

All Cincinnati Gearing Systems catalogs and technical brochures