Poly Split (PS) Shaft Seal Machined entirely split to make installation a Cinch... The model PS CinchSeal® is designed to seal screw conveyors, mixing and blending equipment. It is manufactured out of polypropylene and stainless steel to handle dry powder and slurry products in the food service, pharmaceutical and chemical industries where stainless steel is required. • Eliminates product leakage, house keeping issues, bearing and drive failure • Installation requires no equipment removal • Shaft damage and wear is totally eliminated due to the unique elastomer design that turns with the shaft • Eliminates product contamination caused by the breaking down of braided packing • Seals hazardous vapors and dust • Consumes packing Applications The PS CinchSeal is proven effective in sealing ribbon blenders, driers, and paddle mixers used in processing dry powder, semisolid and slurry applications. Among the particularly challenging materials we have been successful in sealing are: cement, spices, cocoa powder, liquid chocolate, plastics and resins, salt, sugar, etc. Available Accessories • Seal Repair Kits • Will not damage or undercut shaft • Air Pressure Regulators • Additional Elastomers CinchSeal • 23b Roland Avenue • Mount Laurel, NJ • 08054 856.662.5162 • 856.66

Exploded view of CinchSeal Poly Split Split PTFE Rotor Cups Elastomer Boot Split Poly Housing Stainless Plate How the Poly Split Works The heart of the PS CinchSeal is the FDA approved elastomer which is designed to create an interference fit on the shaft. This tight fit allows the elastomer to turn with the shaft and thereby eliminating shaft damage or wear. The elastomer seals the shaft and stops product from migrating past while also turning a set of mineral filled PTFE rotor cups. As the elastomer and rotor cups turn with the shaft they are compressed with the optimum amount of face pressure...