Machined entirely split to make installation a Cinch... The model 9700 CinchSeal® is designed to seal mixing and blending equipment. It is manufactured entirely out of stainless steel to handle dry powder and slurry products in the food service, pharmaceutical and chemical industries where stainless steel is required. • Eliminates product leakage, house keeping issues, bearing and drive failure • Installation requires no equipment removal • Shaft damage and wear is totally eliminated due to the unique elastomer design that turns with the shaft • Eliminates product contamination caused by the breaking down of braided packing • Seals hazardous vapors and dust • Consumes less power than braided packing • Will not damage or undercut shaft CinchSeal • 731 Hylton Road • Pennsauken, NJ • 08110 856.662.5162 • 856.662.5264

Exploded view of CinchSeal 9700 Stainless Housing Elastomer Boot PTFE Rotor Cups O’Ring Stainless Plate The heart of the 9700 CinchSeal is the FDA approved elastomer which is designed to create an interference fit on the shaft. This tight fit allows the elastomer to turn with the shaft and thereby eliminating shaft damage or wear. The elastomer seals the shaft and stops product from migrating past while also turning a set of mineral filled PTFE rotor cups. As the elastomer and rotor cups turn with the shaft they are compressed with the optimum amount of face pressure against a stationary face....