Technical Specifications of RP3 and RP3H Radial Tyre Retreading Presses

General Description

The RP3 and RP3H presses are designed for retreading a variety of tyres including light truck, 4x4, truck, and aircraft tyres. They support tubeless, bladder, and curing tube manufacturing methods. Additionally, they can be equipped with a high belt to accommodate a wider range of tyre widths.

Heating Options

The presses can be heated using either steam or electricity, providing flexibility depending on operational requirements.

Key Technical Parameters

• Steam Consumption: Measured in Kg/h (specific values not provided)
• Maximum Inflation Pressure: 250/300 Bar (standard), higher pressures available on request
• Engine Power: 23 HP for RP3, 24 HP for RP3H
• Dimensions: Width approximately 1950 mm, Length between 2100 mm and 2350 mm, Closed Height around 1500 mm, Open Height between 2250 mm and 2350 mm
• Maximum Tyre Outer Diameter: Approximately 910-980 mm
• Maximum Tyre Cross Section: 280-330 mm
• Weight: Between 1750 Kg and 1950 Kg
• Air Consumption: 18 Nlt/h
• Cavity Dimensions: Diameter around 1950 mm, Height approximately 2100 mm

Tyre Size Compatibility

The presses accommodate tyre sizes ranging from 235/85R16 to 285/70R19.5 and from 205/65R17.5 to 305/70R19.5, covering a broad spectrum of light truck and commercial vehicle tyres.

Additional Notes

All dimensions and specifications are indicative and subject to change without prior notice by the manufacturer. For specific requirements such as higher inflation pressures, customization is available upon request.

Manufacturer Information

More details can be found at www.cimaimpianti.com.