Technical Data Overview

This document presents key performance parameters of an electrical device, likely a motor or generator, including efficiency, output power, current, speed, and torque.

Efficiency

The efficiency is indicated on a scale from 20% to 100%, with specific reference points at 20, 40, 60, and 80 percent efficiency. This suggests the device operates across a broad efficiency range depending on load or operating conditions.

Output Power

Output power values are given in watts (W), ranging from 2.5 W up to 12.5 W, with intermediate points at 5.0 W, 7.5 W, and 10.0 W. This indicates the device's power output capability under various operating conditions.

Current

Current is measured in milliamperes (mA), with values spanning from 1000 mA to 5000 mA, and possibly higher. This range reflects the electrical input or output current associated with different power levels.

Speed

Speed is expressed in revolutions per minute (rpm), with values from 5000 rpm up to 25000 rpm. This wide speed range suggests the device can operate efficiently at various rotational speeds.

Torque

Torque is indicated in milliNewton meters (mN·m), though exact values are not clearly specified. Torque is a critical parameter for understanding the mechanical output capability of the device.

Input Voltage

The input voltage is noted as approximately 6.8 V, which is essential for defining the operating electrical conditions.

Summary: The document provides a snapshot of the device's operational parameters, highlighting its efficiency, power output, current consumption, rotational speed, and torque under a specified input voltage. These parameters are crucial for evaluating performance and suitability for specific applications.