*mydirectindustry

Catalogs
CHROMATOTEC
airmoVOC WMS

airmoVOC WMS

Product catalog summary

Overview: The airmoVOC WMS is a gas analyzer designed for monitoring volatile organic compounds (VOCs) in water, including BTEX, based on the EPA 502.2 method. It is suitable for various water markets such as finished drinking water, wastewater, and surface water, and can also be used for air monitoring.

Specifications:

Model: A25022 and A25022-502
Detection Limit: < 0.001 µg/l for BTEX
Detection Range: 0.05 to 20 µg/l for surface and finished drinking water; 0 to 50,000 µg/l for other liquids
Relative Standard Deviation: < 0.3% over 48h (Retention Time), < 3% over 48h (Concentration)
Linearity: R2 > 0.99 on all compounds
Cycle Time: 30 min or 60 min
Power Supply: 230V / 50 Hz or 115V / 60 Hz
Installation: Wall-mounted cabinet with dimensions 1440mm x 600mm x 300mm

Features:

Miniaturization, sensitivity, mobility, and flexibility
Integrated system from sample port to data storage
Uninterrupted sampling with pre-concentration on absorbent tube
Gas chromatograph with metallic column and programmable temperature gradient oven
Vistachrom software for data visualization, storage, and analysis

Options:

DET QMS for online GCMS
Automatic validation and calibration with internal CALIB
Integrated hydrogen and zero air generators
Multiplexer for 2 to 32 streams
Analog output 4-20 mA or 0-10 V

Applications: The airmoVOC WMS can analyze up to 60 compounds, including BTEX and chlorine compounds, in various water types and air environments. It is applicable for ambient air control, urban/non-urban pollution control, and indoor measurements.

Catalog excerpts

ONLINE ANALYTICAL SOLUTIONS EXPERTS GAS ANALYZER GC 866 Monitoring of VOC in water - BTEX included Based on EPA* 502.2 Method zene n e b l ethy m i r T Model: A25022-502 Water markets Finished drinking water Raw source water Drinking water Surface water Wastewater (head space / ppt) Rain water Ambient air control Urban/Non urban area pollution control Indoor measurements BTEX/PAMS/CE analysis Finished water Waste water / effluent Chromatotec® is specialised in VOC, Sulfur and permanent gases analysis at trace and ultra trace levels (ppm, ppb, ppt). Please visit our website for more details.

Open the catalog to page 1

The airmoVOC WMS uses a valve with a sample trap. It also features a metallic capillary column. • Miniaturization, sensitivity, mobility and flexibility are its main features. • Everything from the sample port up to the data storage is integrated in a wall mounted box. • Uninterrupted sampling with pre-concentration on absorbent tube • Gas chromatograph with metallic column with programmable temperature gradient oven. Pressure control of the carrier gas by piezo-valve. • One week tested after production for quality control. Vistachrom software enables the user to visualize and store data on a...

Open the catalog to page 2

airmoVOC WMS

airmoVOC WMS

Catalog excerpts

All CHROMATOTEC catalogs and technical brochures