airmoCAL

airmoCAL

airmoCAL

Product catalog summary
Overview: The airmoCAL is a calibration device designed for automatic validation of analytical results at various concentration levels. It is housed in a 19'' rack, available in 4U or 5U sizes, and is controlled by Vistachrom software.
Specifications: The device uses permeation tubes and/or certified cylinders for calibration. It features a regulated temperature oven for precise control of gas concentrations. The system supports multiple dilution methods, including critical orifice and Mass Flow Controllers (MFC), allowing a wide range of dilution points.
Options: The airmoCAL offers several options, including a multi-oven setup for different permeation tubes, a multiplexer for multiple methods, and a heated valve for semivolatile calibration. Additional options include gas purifiers, alarms, and various power supply configurations.
Software: Vistachrom software provides remote control, traceability, threshold alarms, and data export capabilities. It supports both laboratory and continuous measurements.
Technical Specifications: The device operates at an oven temperature of 45°C ± 0.1°C, with MFC ranges for sample and dilution gas. It requires zero air or nitrogen for dilution and has a power consumption of approximately 100 VA. The dimensions are specified for both 4U and 5U configurations.
Ordering Information: Various models are available, including airmoCAL, airmoCAL-D, airmoCAL-MFC, and airmoCAL-200-MFC, each with specific features and configurations.
See more

Catalog excerpts

airmoCAL-1

ONLINE ANALYTICAL SOLUTIONS EXPERTS Calibration device inside 19ˮ and 4U/5U rack Designed for automatic validation of results at different concentration levels ZERO / Sample / Cylinder / CALIB / dilution points Calibration instrument piloted by Vistachrom software from the GC Chromatotec® is specialised in VOC, Sulfur and permanent gases analysis at trace and ultra trace levels (ppm, ppb, ppt). Please visit our website for more details.

 Open the catalog to page 1
airmoCAL-2

airmoCALCalibration device inside 19'' and 4U/5U rackDesigned for automatic validation of results at different concentration levels ZERO / Sample / Cylinder / CALIB / dilution points by MFC or critical orifice Product technical specifications: Permeation tubes available: • N-Butane, N-Hexane, Benzene, DMS in standard and short delivery time • Others upon request Oven temperature: Mass Flow Controllers Range: • Depending on the expected calibration concentration • The airmoCAL is fully controlled by Vistachrom software Cycle time : • Depending on the analyzer or required sensitivity Gas supply:...

 Open the catalog to page 2

All CHROMATOTEC catalogs and technical brochures

  1. airmoPURE 2L

    2  Pages

  2. airmoPURE

    2  Pages

  3. DET H2O

    2  Pages

  4. microF

    2  Pages

  5. microVOC

    2  Pages

  6. vigi e-nose

    2  Pages

  7. THT MEDOR

    2  Pages

  8. H2S MEDOR

    2  Pages

  9. trsMEDOR

    2  Pages

  10. airmoMEDOR

    2  Pages

  11. energyMEDOR

    2  Pages

  12. chromaPID

    2  Pages

  13. chromaDID

    2  Pages

  14. chromaS COS

    2  Pages

  15. chromEnergy

    2  Pages

  16. chromaTCD

    2  Pages

  17. chromARGON

    2  Pages

  18. chromaFID

    2  Pages

  19. chroma CO

    2  Pages

  20. auto GCMS 866

    2  Pages

  21. airmoVOC WMS

    2  Pages

  22. airTOXIC WMS

    2  Pages

  23. airTOXIC

    2  Pages

  24. airmoVOC C2C6

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.