ROBA®-diskstop®

ROBA®-diskstop®

ROBA®-diskstop®

Product catalog summary
Introduction
The ROBA®-diskstop® is a safety brake specifically designed for elevators, ensuring high safety standards for both passengers and cargo. It complies with the Elevator Directive 2014/33/EU and standards EN 81-20 and EN 81-50.

Functionality
This brake operates using a spring-applied mechanism that engages when de-energized and releases electromagnetically when energized, allowing free rotation of the brake disk.

Applications
The brake is utilized for safe holding, emergency stops, and as a protective device against overspeed or uncontrolled movements in elevators.

Performance Characteristics
  • High energy absorption during dynamic braking.
  • Can be released electrically and mechanically without direct drive access.
  • Includes a microswitch for monitoring brake condition and patented noise damping for quiet operation.
  • Easy installation with no adjustments needed.

Technical Data
Available in sizes 6 to 10, with varying braking forces and torques, suitable for high-speed elevators with large masses. Customization options are available for noise or performance optimization.

Certification
The brakes are type-examination tested and certified for dual-circuit systems as per EN 81-20/50.

Additional Options
  • Terminal box for wiring and rectifier storage.
  • Proximity switch for release monitoring.
  • Special hand release levers and covers.

Guidelines and Standards
The brakes comply with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. Proper installation and operational instructions are crucial for compliance and safety.

Safety and Liability
Handling should be done by qualified personnel, adhering to all safety regulations, including risk assessments and protective measures.

Application Conditions
Designed for dry running and specific ambient conditions, the brakes require proper bedding-in of friction linings and are protected against large foreign bodies and water spray.
Specifications and Compliance
The document details compliance requirements for product components intended for machine integration, emphasizing evaluation under EMC guidelines. Compliance is verified in laboratory conditions, and the machine manufacturer is responsible for ensuring conformity with safety directives as per the Machinery Directive 2006/42/EC.

ATEX Directive
The product is not suitable for explosive environments without a conformity evaluation and must be classified and marked according to Directive 2014/34/EU for such applications.

Company and Contact Information
Contact details for Chr. Mayr GmbH + Co. KG headquarters and branch offices worldwide are provided, including addresses, telephone numbers, fax numbers, and email addresses for direct communication.
See more

Catalog excerpts

ROBA®-diskstop®-2

your reliable partner ROBA®-diskstop® Highest operational safety for people and load elevators Performance Characteristics •• EU Type Examination Certificate according to the Elevator Directive 2014/33/EU (reference Standards EN 81-20 and EN 81-50) •• High energy absorption capability during dynamic braking actions Application possible in elevators with high speeds and large masses •• Can be released electrically and mechanically Without direct access to the drive (patented hand release) •• Microswitch query of the brake operating condition Safe switching function monitoring •• Patented switching...

 Open the catalog to page 2
ROBA®-diskstop®-3

your reliable partner Technical Data and Dimensions 1) Tolerance -0 % / +60 % “performance-optimised” design: For applications with high requirements on braking torque and performance density. Switching noises up to approx. 65 dB(A) “noise-optimised” design: For applications with high requirements on switching noises. Switching noises lower than 60 dB(A) 2) Overexcitation is necessary for operation! 3) Other brake disk widths possible - Please contact the respective sales representative or the mayr® company directly. Certification The brakes have been type-examination tested as a braking device...

 Open the catalog to page 3
ROBA®-diskstop®-4

your reliable partner 1) Braking force tolerance: 0 % / + 60 %. Other braking force adjustments: see Table „Braking Force Adjustment11, page 4. Switching noises up to approx. 70 dB(A). 2) Overexcitation is necessary for operation! 3) Other brake disk widths possible - Please contact the respective sales representative or the mayr® company directly. Braking Force Adjustment (Manufacturer-side) [N] Size Certification The brakes have been type-examination tested as a braking device acting on the shaft of the traction sheave and as part of the protection device against overspeed for the car moving...

 Open the catalog to page 4
ROBA®-diskstop®-5

your reliable partner ROBA®-diskstop® – Further Options In addition to the standard brakes, mayr® power transmission provides a multitude of further designs, which cannot be described in detail in this catalogue. Some of the most frequently requested options are: • Terminal box • Proximity switch as an alternative to microswitch for switching condition indication (release monitoring) • Special hand release lever • Cover Please contact mayr® for further information. Release monitoring with proximity switch Terminal box (Item 1) for the wiring and storage of rectifiers (ROBA®-switch). When the...

 Open the catalog to page 5
ROBA®-diskstop®-6

your reliable partner ROBA®-switch Type 017._00.2 Application ROBA®-switch fast acting rectifiers are used to connect DC consumers to alternating voltage supplies, for example electromagnetic brakes and clutches (ROBA-stop®, ROBA®-quick, ROBATIC®) as well as electromagnets, electrovalves, etc. Fast acting rectifier ROBA®-switch 017._00.2 • Consumer operation with overexcitation or power reduction • Input voltage: 100 - 500 VAC • Maximum output current IRMS : 3 A at 250 VAC • UL-approved Function The ROBA®-switch is used for operation at an input voltage of between 100 and 500 VAC, depending on...

 Open the catalog to page 6
ROBA®-diskstop®-7

your reliable partner ROBA®-diskstop® – Guidelines Guidelines on the Declaration of Conformity: A conformity evaluation has been carried out for the product (electromagnetic safety brake) in terms of the EU Low Voltage Directive 2014/35/EU. The Declaration of Conformity is laid out in writing in a separate document and can be requested if required. Guidelines on the EMC Directive (2014/30/EU): The product cannot be operated independently according to the EMC directive. Due to their passive state, brakes are also non-critical equipment according to the EMC. Only after integration of the product...

 Open the catalog to page 7
ROBA®-diskstop®-8

C> mayr* your reliable partner Headquarter Chr. Mayr GmbH + Co. KG EichenstraBe 1, D-87665 Mauerstetten Tel.: +49 83 41/8 04-0, Fax: +49 83 41/80 44 21 www.mayr.com, E-Mail: [email protected] France Mayr France S.A.S. Z.A.L. du Minopole Rue Nungesser et Coli 62160 Bully-Les-Mines Tel.: 03.21.72.91.91 Fax: 03.21.29.71.77 [email protected] USA Mayr Corporation 10 Industrial Avenue Mahwah NJ 07430 Tel.: 2 01/4 45-72 10 Fax: 2 01/4 45-80 19 [email protected] China Mayr Zhangjiagang Power Transmission Co., Ltd. Fuxin Road No.7, Yangshe Town 215637 Zhangjiagang Tel.: 05 12/58 91-75 67 Fax: 05 12/58 91-75...

 Open the catalog to page 8

All Chr. Mayr GmbH + Co. KG catalogs and technical brochures

  1. Steel industry

    12  Pages

  2. Wind energy

    24  Pages

  3. Elevator Brakes

    24  Pages

  4. EAS®-Sp/Sm/Zr

    24  Pages

  5. EAS®-smartic®

    12  Pages

  6. EAS®-reverse

    4  Pages

  7. EAS®-HTL

    8  Pages

  8. EAS®-HT

    28  Pages

  9. EAS®-HSE

    16  Pages

  10. ROBATIC®

    60  Pages

  11. EAS®-axial

    24  Pages

  12. ROBA®-ES

    32  Pages

  13. smartflex®

    8  Pages

  14. ROBA®-slip hub

    24  Pages

  15. EAS®-compact®

    40  Pages

  16. ROBA®-takt

    60  Pages

  17. tendo®-PM

    44  Pages

  18. ROBA-stop®-S

    12  Pages

  19. ROBA®-quick

    60  Pages

  20. ROBA-stop®-M

    24  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.