I CABINET ENVIRONMENT MONITORING ■ Introduction WSK series cabinet thermostat is a measurement device used on temperature and humidity control. the humidity control module is integrated in the system, greatly improving the suitability of the equipment, obtaining the temperature and humidity change from the sensor and sending the measured data to the electronic processor. The output device will then control the temperature variation within a specific range. WSK series cabinet thermostat using load control relay output, has fast output response, accurate PID parameter auto-tuning, support, Modbus communication protocol and is built-in with various output types, allowing different systems to reach a stable control status very quickly, can be used in the worst environment for long-term use, applied to the various occasion which need temperature and humidity control. • 3 digital or 4 digital LED screens. • Built-in digital filter reduces interfereence. • Standard panel size 48x48mm / 72x72mm. • Optional 35mm DIN rail mounting (only 48X48mm mode). • Heat/Fan control mode free to the configuration. • Sensor length max 10 meters (default 3 meters). • Accuracy temperature within 1°C & humidity within 5%. • Support multi sensor input (K, S, T, E, J, B, N, CU50, PT100). Sensor type Communication Control output Humidity signal in Temperature signal in Panel size Related Accessories Model: WSCP-15 • Temperature range: -50~100°C, accuracy ±1% • Temperature range: -40~125°C, accuracy ±0.3% • Humidity range : 0~100%, accuracy ±3% Technology of Electrical Automatic

Technology of Electrical Automatic