BINCEN Weighbridge for Diffferent scale body structure choice
3Pages

INSTURCTION (τ type structural steel profiles) 一Technology field. The utility model involving profiles, especially a τ type structural steel profiles.A kind of τ type of Weigh-bridge,including L type of foundation beam and horizontal geotextile,the main idea is that put at the top of the L type of foundation beam with horizontal geotextile. .Contents 二.Contents of the invention. The utility model is designed to provide a bearing box beam with simple structure, bending, twisting, bearing plate tensile strength, and good performance of the structural steel profiles, it is to use H-steel and channel steel combined profiles, namely: τ type steel profiles (hereinafter referred to as "τ section"). The purpose of this utility model adopted by the technical scheme, including L foundation beam, horizontal reinforcing plate, the mentioned L foundation beam on the face placed a horizontal reinforcing plate. The utility model, wherein the L-shaped foundation beam and horizontal reinforcing plate welding connection between a fillet weld. The utility model as scale body box girder. Of the three profiles, H-beams, Channel Steel, τ section at the same weight condition, τ type steel scale body is highest strength, because the same τ type steel girder,the height can improve 40mm or so. Girder strength is directly proportional to its height cubed and proportional to the square of thickness; Under the same weight, increase girder height ratio will improve strength much better than increase girder thickness. Such as: #28A H-beam, #28A Channel-Steel and τ type steel(unit length and weight per unit are basically same), compared to τ section,its height can reach (280 mm + 40 mm =) 320 mm, 320/280 = 1.143, 1.1433 = 1.493, namely: the basic unit of length and weight of τ section which its bending strength increase more than 40% compared to its basically same weight of H-beams, channel steel . τ section applied in scale body as box girder, the scale plate bearing the effect is the same as H-beam,which is not easy to fracture.. When exist τ section, making truck scale body panel increase of service life, rather than increasing the panel thickness only,meanwhile, improve the electronic truck scale on general effectiveness and save cost. Another,τ steel section is also applied to the other bearing box beam.

Different scale body ,types of girder, performance and characteristic, cost, application types girder, stated as below: Channel Steel All-steel Plate U-shape Beam Steel beams without U-beam exist U closed horizontal edge,with bottom edge, horizontal edge, plate edges,the panel edges,the panel is easy resistance of weld joint is poor so that scale body concave; plate welding make service life of scale body Steel Cost Scale body cost - 1 In electronic truck scale (also called electronic weighbridge)which the scale body girders

usually use channels, H beam, All steel beam, reinforced u-shaped beam .The longitudinal beam number (6, 7, 8)according to the width of the truck scale, Scale panel commonly used delta 8, 10, 12, 14, 16 mm thick steel plate, the truck scale tonnage capacity greater, the panel more thick.Truck scale scale body lane generally will be to bottom seal, seal at the bottom of steel plate is also according to the capacity of truck tonnage and user requirements to design, which can be choose the delta 3, 4, 5, and 6 mm thick steel plate for the bottom seal of the driveway(lane). The cost of scale...