Chongqing Bincheng Electrical&Mechanical Technology Co.,ltd www.bincen. net.cn [email protected] BINCEN·WEIGH BINCEN Truck Scale Weighbridge Patent Structure’s Feature 1. Practice of scale structure 1 Scale body girder adopt our company’s patent beam structure:L combining with τ shape girderPatent No# ZL 2009 2 0126938.2ZL 2009 3 0160561.8. 2)This patent structure combine channel steel and joist steel's merit Panel is not easy to fracture Scale body strength is better than U shaped steel scale body structure.Scale body panel and crossbeam consist of solid box-type body ,and horizontal with several transverse reinforcement lane closed with steel plates intensity is stronger than open type structure.With better compressive strength, impact resistant,anti-bending, fatigue resistanceand longer service life. 2.The scale body process diagram as follows: 1)Our company’s patent beam structure’s processing and shaping picture Scale body girder material thickness 8mm above 2Other company uses the u-shaped girder structure scale body Girder material thickness 4-6 mm 3)Our company’s truck scale bottom diagram Lane closed at the bottom,overall strength is much better u-shaped beam scale body diagram No transverse reinforcement plate,No back cover,no strong sensor to support

Chongqing Bincheng Electrical&Mechanical Technology Co.,ltd www.bincen. net.cn [email protected] The difference of u-shape steel structure’s scale body : Other companies use u-shape steel structure, use 4-6 mm fold u-shaped beam which is weld into with scale board,scale body without bottom sealingthin U-shaped girder steel low costit’s less use about one ton steel than our company’s patent structure as with single side welding around degree of scale body when load makes girder weld easy to tear reduce it’s service life big that scale body prone to pressure or crushed.When use the scale...