BINCEN Truck scale SCS series technical instruction
14Pages

SCS Electronic Truck Scale StandardNational Standard“GB/T 7723-2008” VerificationJJG 555-1996《非自动衡器通用检定规程》 Chongqing Bincheng Electrical & Mechanical Technology Co.,Ltd Add:No. 13-2-1, Fenghuang Road, Shiqiaopu, Jiulongpo, Chongqing, China (Mainland) Add:No. Zip: 400039

Chongqing Bincheng Electrical & Mechanical Technology Co., LTD, has been engaged in research and manufacture of SCS series electronic truck scale which has modern intelligent function of the truck scale, adopted new structure design and high performance, high precision of digital weighing load cells with the ideal, have high measuring accuracy, convenient installation, simple operation, stable performance, low failure rate, long service life, etc. SCS series electronic truck scale, applicable to all kinds of trucks weighing measurement of the materials, widely used in the station, port,...

B. Weighing Indicator XK 3190-DS3 Technical Parameter Digital load cells connection Connection method: RS422/485 Connection distance: About 1000 meters Connection quantity: 1~16 digital loadcells Communication protocol of load cell: Load cell power: DC 12V/0.8A (Max) Display Display method: Display range: 7 bits super bright LED display, 10 indications -325000~325000 (d=10) -900000~900000 Keyboard Numeric key: 0~9 Function key: 24 Clock: real clock Scoreboard (i.e. Large Screen) interface Signal output method: Signal: digital 4/20mA current loop (constant current) Baud rate: Transmission...

Figure 1.1 SCS electronic truck scale C. SCS Electronic Truck Scale Specifications pecifications Truck Scale Model Selection Guide (OIML III) Series Parameter Rated load(t) Load cell×number Length7,8,9,10,12,14,16,18,20,22,24 meters, etc.. Size length × width Width3,3.2,3.4 meters, etc.. Platform size can be customized(length≤10mgenerally adopt 1 platform/4 load cells912madopt two platform、6 load cells. length≥10m Weighing indicator Printer FS3198-A2, XK3190-A9 for analog load cells, XK 3190-DS3, D2008F, for digital load cells etc.. EPSON LQ-300K、Panasonic KX-P1131,optional. Temperature ℃...

D. The Electronic Truck Scale Acceptable Error E. SCS electronic truck scale— the foundation of the structure A-l. Pit-less Foundation Structure Figure 1.2 Pit-less Foundation's Schematic Drawing B-l. Shallow Pit Foundation Structure Figure 1.3 Shallow Pit Foundation's Schematic Drawing Foundation construction, build scale room, ready to work station (desk or desk), scale installation of 220V power supply switch inside the room(socket) above finished by the user before installation. The foundation of the construction scale body, must according to company foundation map (or foundation...

rod grounding to construction together. Chapter 2 Digital Truck Scale Digital truck scale is the new generation truck scales. As the continuous development of electronic technology, advanced digital process technology is applied in weighing measurement industry. Equipped with digital intelligent load cells and digital weighing indicator, digital truck scale represents the most advanced technology of electronic truck scale. Digital truck scale possesses excellent entire performance, strong environment adaptability, and high intelligent standard. Then the high-tech quality of electronic truck...

Standard Weighbridge: Standard lengths of truck scales are as follow Chapter 3 Scale Body Installation Foundation construction, building scale room, work station etc, should be completed by user. The foundation of the construction must follow the pit-foundation drawing. The user is responsible for the loading and unloading after the electronic truck scale body module transported to the truck scale pit. The supplier is responsible for the installation technical guidance; The supplier is responsible for the system of the connection, system debugging. The verification and calibration relevant...

4. The sewers or gully drainages should be set large enough at both sides of the scale pit (at least one side) to avoid water submerging the load cells and junction box in case of the thunderstorm! Otherwise the load cells or junction box may be damaged by water 5. Note: after the foundation constructed, please bury ground steel bar with grounding bolt M10 mm or M12 mm at the upper terminal, lightning rods outside should be 3m to 8m away from the scale body. The lightning rod is at soil moist position. And please add 5 ~ 10 kg of salt increase the soil electrical conductivity in order to...

Hoist the 3.0m×5m main module to the right position in the truck scale pit, and place load cells pressure head under the load cell. Level up the truck scale main modules with pieces of different width steel small board. 5. Hoist the main module’s right vice 3.0m×5m module to right position of main module. And level up the vice modules with pieces of different width steel small board. 6. Hoist middle 3.0m×5m vice module to left position of main module. And level up the vice modules with pieces of different width steel small board.

7. Hoist far left 3.0mx5m vice module to left limit position of the pit. And level up the vice modules with pieces of different width steel small board. 8. Level up all the truck scale modules with pieces of different width steel small board. 9. Screw all modules connecting bolts and nuts. 10. Connect load cells lines to junction box and the line between junction box and weighing indicator. (See. XK 3190-DS3 manual more details.) 1. The load celt is equipped with 9 core connector assembly for connection. Meanings of all pins are marked in Figure 2-1-1. 2. XK3190-DS3 load cell interface...

Chapter 4 System Debugging, Examination and Verification Debugging systems which include the five steps: 1) set up the internal instrument parameters of the weighing indicator; 2) correct the angular difference of scale; 3) establish empty scale with zero point; 4) calibrate the scale; 5) set up the RS232 communication parameters and printing bill parameters on the weighing indicator. The operation steps are shown in XK3190-DS3 Weighing indicator manual. After all systems installation completed and the truck scale is debugged primarily, please verify the truck scale with enough standard...