Pultrusion enables continuous produc- tion of straight composite parts with complex sections, hollow profiles or sharp angles. This process means you can achieve very high reinforcement levels (60 - 70%) with high strength.

VOLUMAT™ is a combination of fabric or multiaxial + mat, mechanically bonded by the needleloom process, without chemical binding. • This needleloom process adds volume to reinforce- ments which means greater part thicknesses can be • It is highly advantageous for parts with sharp angles, because high volume fibers allow optimum filling of critical areas. • The use of a fabric or multiaxial backing for VOLUMAT™ adds transverse mechanical strength to finished products. • Does not fray during processing which gives a better surface aspect than most of other reinforcements like facture of parts that...

COMPLEMENTARY SOLUTIONS The VOLUMAT™ range was specifically designed to deal with certain design and manufacturing constraints involved in the pultrusion process. However, CHOMARAT does offer other reinforcement materials which can be used in this process and offers complementary characteristics. Assembly of a 300 g/m2 fabric to a specific "long-fiber" APPLICATIONS ADVANTAGES This reinforcement material is particularly suited to the production of wide parts which need a high level of mechanical characteristics. The long-fiber mat facilitates holding and forming before it goes into the die and...

Textiles Industries North Africa North America Engineered Textiles 36 Qingdao East Road - Taicang Important: all properties are average values given for indication. Values are not intended for use as a specifi cation. Information given in this document is based on the present knowledge of the technical properties of our product. All information is believed to be accurate but is given without acceptance of liability. Users should make their own assessment of the suitability of any product for the purposes required. Information contained in the present document refers to the product specifically...