*mydirectindustry

TETRIS 1900

Product catalog summary

Overview: The document provides technical specifications and operational details for the TETRIS 1900 BIZONE, a double temperature controller structure designed by Chiossi e Cavazzuti s.r.l. It features heavily insulated construction to minimize power consumption and utilizes forced hot air ventilation.

Specifications:

Heating Zones: 2 independent zones, each capable of reaching a maximum temperature of 200°C.
Drying Area: 2000/4000 x (950 + 950) mm.
Electrical Requirements: 400V 3P + PE, with current requirements of 43 A for DUAL 1900 and 86 A for POKER 1900.
Exhaust Specification: 180 m³/h with Ø 150 mm for DUAL 1900 and 360 m³/h with Ø 150 mm for POKER 1900.
Power Consumption: 28 kW for DUAL 1900 and 57 kW for POKER 1900.
Belt Width: 2 x 950 mm.
Heating Chamber Length: 2000 mm for DUAL 1900 and 4000 mm for POKER 1900.
Production Capacity: Curing time of 5 minutes, with a throughput of 220 pieces/h for DUAL 1900 and 440 pieces/h for POKER 1900.
Dimensions: 4100 x 2200 x 2250 mm for DUAL 1900 and 6100 x 2200 x 2250 mm for POKER 1900.
Shipping Weight: 1050 kg for DUAL 1900 and 2200 kg for POKER 1900.

Technology: The TETRIS 1900 platform is divided into two independent 950 mm modules, each equipped with a dedicated temperature probe, a solid-state relay for power control, and a separate temperature controller. This setup allows for precise temperature management based on real-time measurements.

Temperature Testing: A graph illustrates temperature readings inside the tunnel at various positions, showing distinct temperature differences between the two modules. The left module was stabilized at 100°C, while the right module was at 160°C, demonstrating effective separation even at the closest middle points.

Disclaimer: The data is subject to change without notice, and Chiossi e Cavazzuti s.r.l. reserves the right to modify products and specifications at any time. Unauthorized copying or distribution of this material is prohibited.

Catalog excerpts

&& CHIOSSI E ® W CAVAZZUTI TETRIS 1900 BIZONE 2 INDIPENDENT HEATING ZONES Max Temperature: up to 200°C in each zone Drying Area: 2000/4000 x (950 + 950) mm controller ventilation structure heavily insulated power consumption minimized TECHNICAL DATA Chiossi e Cavazzuti s.r.l. - Via Costituzione 50/D 42015 Correggio (RE) Italy - Tel. +39 0522 637224 Fax. +39 0522 631180 - [email protected] - www.chiossiecavazzuti.com

Open the catalog to page 1

NEW TECHNOLOGY The TETRIS 1900 plaftform has been divided in two independent 950 modules. Every module has a dedicated temperature probe, a solid state relay that controls the power to the heating resistor and a separated temperature controller that commands the SSR according to the temperature set-point and the temperature measured by the probe in real time. The graph below displays temperature readings inside the tunnel in different positions, specifically at 10-45-85-95135-185cm from left border of the 1900mm wide belt conveyor. The measurement was carried out using an external high precision...

Open the catalog to page 2

All Chiossi e Cavazzuti srl catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list