Catalogs >
CHINO CORPORATION >
Unit Type Body Surface Temperature Checker TP-U

Unit Type Body Surface Temperature Checker TP-U
4Pages

Catalog excerpts

Unit Type Body Surface Temperature Checker TP-U - 1

Unit Type Body Surface Temperature Checker To detect a person who have a fever! Easy to check the body surface temperature! TP-U is a body surface temperature measuring unit that installs 2000 pixels thermal imaging sensor. It quickly measures the body surface temperature and if detects the alarm point temperature (ex. 38°C) then the failure lamp lightens. Install at employee entrance, school entrance, crowded facilities, etc and simply check the fever. FEATURES Measures body surface temperature just in 3 seconds. Easy operation and self check by confirming standby, good and failure lamps. Hygienic because non-contact measuring. Auto Correct: Screening function provided. Calculate the measurement correction value of the body surface temperature, which is affected by ambient temperature and reduce the effect. Then it automatically set the correction value by reflecting the alarm value for the judgment. Available for simple operation at semi-outdoor ! Manual Correct: Manually set offset adjustment of measuring temperature by PC is provided. Available for arbitrary setting of offset value ! Prepared for stand-alone operation. Exclusive application software Universal power supply, 100 to 240 VAC. For crowded places! At the employee entrance... *This unit is a sensor to measure a surface temperature and is not a clinical thermometer. This unit cannot be used for medical treatment or medical examination.

Open the catalog to page 1

Unit Type Body Surface Temperature Checker TP-U - 2

OPERATION EXAMPLE Entrance check where the ambient temperature is stable. Entrance check where the ambient temperature fluctuates. Recommended Function: Manual Correct Recommended Function: Auto Correct The temperature inside the mouth is resistible to the outside temperature and stable measurement is possible. When using semi-outdoor, Avoid direct sunlight and in the weather. Preparation: Please warm up for 60 minutes before using. Example of How to Check 1 Confirm the orange lamp is lighting. 2 Measure body surface temperature. Confirm that the unit is stand-by. Body surface temperature...

Open the catalog to page 2

Unit Type Body Surface Temperature Checker TP-U - 3

Body surface temperature checker application software (standard provided) Set various setting and display thermal image by PC. Available to display comments SPECIFICATIONS Temp : Accuracy rating : 20 to 40°C ±0.5°C at 37°C Ambient temperature 25°C) Detector : Thermopile array Approx. 2000 Pixel Wavelength : Center wavelength 10 m Viewable Angle : 60 x 60 Radius Resolution : 21.8mard Frame Speed : 1Hz Focus : Fixed Focus Communication Interface : 10BASE-T/100BASE-TX Contact Output : 2 points, Non voltage contact output Power Supply : 100 to 240 V AC (universal power supply) Working Temp : 0...

Open the catalog to page 3

Unit Type Body Surface Temperature Checker TP-U - 4

PERFORMANCE SPECIFICATION Measuring Hood Used for when installing TP-U Specifications subject to change without notice. Printed in Japan (I) 2010. 9 CHINO CORPORATION E-mail : inter@chino.co.jp Website : www.chino.co.jp/

Open the catalog to page 4