ELECTRONIC MINI-RECORDER PERFORMANCE SPECIFICATION The ES600 is a compact industrial analog recorder using 60-mm wide chart paper. Even with its compact size of 96 x 144 mm, it has functions comparable with a large- size recorder including a highly reliable automatic parallel system, easy-to-install fanfold recording chart paper, etc. There are two recording systems, pen type recorders have one-point continuous recording and dot printing type recorders are available which record a maximum of six points. Thermocouples, DC voltages/currents, resistance thermometers and thermistors measuring inputs are avail- able which enable the recording of temperatures, various industrial units, signal voltages and currents. Input signal Scale width Indicating accuracy Dead band Balancing speed Chart paper Recording points Recording system Chart speed (Pen-wriling type) Power supply Allowable voltage Ambient temperature Ambient humidity Allowable signal source resistance Input resistance Common mode rejection ratio mV: More titan 10 mV DC span, less than 50 V span Thermocouple: K, T More than 250°C span E, J More than 200°C span R More than 1000°C span Resistance thermometer: (PtlOO, JPT100) More than 50°C span Thermistor: More than 50°C span full-scale movement Fanfold type, effective width 60 mm, total width 73 mm, total length 10 m Dot printing type; 4 types with 1, 2. 3 and Pen type: Cartridge pen continuous Dot printing type: Ink pad dot printing will) each point in a different 3 points: 1 red, 2 blue, 3 green 6 points: 1 red, 2 blue, 3 green, 4 violet, mV input, thermocouple input: 1 Kli or less Resistance thermometer input: less than Series mode rejection Insulation resistance Withstand voltage Power consumption Between measuring terminals and ground Between power terminals and ground Between measuring terminals and power Between measuring terminals and ground Between power terminals and ground Bel ween measuring terminals and power Front door: ABS plastic Flange and rear case: ABS plastic Panel mourning Resistance thermometer High/Low limit*' High limit* Functions marked * are optional.

CHINO CORPORATION 32-8, KUMANO-CHO, ITABASHI-KU, TOKYO 173