*mydirectindustry

MILA-C5000PN

Product catalog summary

General Description
This document describes the Mini Lamp Annealer MILA-5000 Series, designed for heat treatment of samples up to 20mm square in size.

Features

Capable of heat treating samples up to 20mm square.
Maximum operating temperature of 1200°C.
Integrated desktop design with heating furnace, chamber, and temperature controller.
Supports various atmospheres for heat treatment, with optional vacuum and gas systems.
Rapid heating/cooling and clean heating due to cold wall structures.
Optional CCD camera for observation during heating.

Options

SiC coated carbon susceptor.
Vacuum pumping system including pump, valve, and piping material.
Gas flow meter for up to three types of gases.
CCD camera observation function.

Main Specifications

Model: MILA-C5000PN
Temperature range: Room Temperature to 1200°C.
Maximum heating rate: 50°C/sec from 50-1200°C.
Temperature uniformity: ±4.5°C at 1200°C.
Atmosphere: Air, Vacuum, Inert gas.
Sample size: Maximum W20 × D20 × t2 mm.
Temperature control sensor: Thermocouple JIS K-type.
Lamp rate: 1kW-4-100V (4 pcs).
Safety provisions include thermocouple disconnection, overheat protection, and furnace wall temperature sensor.

Utilities

Power: Single phase AC200V, 4kW.
Cooling water: City water at 0.3MPa, flow rate of 4 liters/min.
Gas Inlet/Outlet: 1/4” Swagelok fitting.
Vacuum port: NW25-KF.
Size: W360 × D355 × H179 mm without protrusion.
Weight: Approximately 15kg.

Note: Specifications and appearance are subject to change without notice for performance improvement.

Catalog excerpts

Mini Lamp Annealer Mini Lamp Annealer MILA-5000 Series ◆ General Description This system is a Mini Lamp Annealer that enables the heat treatment up to 20mm square size samples. ◆ Features 1. Heat treatment up to the maximum 20 mm square size samples 2. Maximum operating temperature 1200°C 3. Desktop type in which heating furnace, chamber and temperature controller are all integrated 4. Heat treatment in a variety of atmospheres (Vacuum pumping system and gas piping system are options.) 5. Rapid heating/cooling and clean heating with cold wall structures 6. Observation with CCD camera during heating (Option)

Open the catalog to page 1

♦ Options 1. SiC coated carbon susceptor Pic. 1 2. Vacuum pumping system (Pump, Valve, Piping material) 3. Gas flow meter (up to three types of gases) Pic.2 4. Observation function with CCD camera Pic.2

Open the catalog to page 3

^Specification and appearance are subject to change without notice for performance improvement. 4388 IKONOBE-CHO, TSUZUKI-KU, YOKOHAMA, 224-0053 JAPAN TEL: +81-45-931-2285 FAX : +81-45-933-9973 http://www.advance-riko.com/en/

Open the catalog to page 4

MILA-C5000PN

MILA-C5000PN

Catalog excerpts

All CHINO CORPORATION catalogs and technical brochures

Archived catalogs