ELECTRONIC MINI-RECORDER PERFORMANCE SPECIFICATION MODEL ES6EO The ES600 is a compact industrial analog recorder using 60-mm wide chart paper. Even with its compact size of 96 x 144 mm, it has functions comparable with a large-size recorder including a highly reliable automatic parallel system, easy-to-install fanfold recording chart paper, etc. There are two recording systems, pen type recorders have one-point continuous recording and dot printing type recorders are available which record a maximum of six points. Thermocouples, DC voltages/cuirents, resistance thermometers are available which enable the recording of temperatures, various industrial units, signal voltages and currents. ■ GENERAL SPECIFICATIONS MODEL ES600 Input signal : mV: More ihan 10 mV DC span, less than 50 V span Thermocouple: K, T More than 250°C span E, J More than 200°C span R More than 1000°C span Resistance thermometer: (PtIOO, JPT100) More than 50°C span Series mode rejection ratio Insulation resistance Scale width Indicating accuracy Dead band Balancing speed 60 mm ±1.0% of input span 0.4% of input span Approx. 2.0 see (50 Hz), 1.6 sec (60 Hz) for full-scale movement Withstand voltage Chart paper Recording points Recording system Chart speed Oot printing Interval Pen litt (Pen-writing type) : Fanfold type, effective width 60 mm. total width 73 mm, total length 10 tn : Pen type; 1 pen Dot printing type; 4 types with 1,2.3 and 6 points : Pen type: Cartridge pen condnuous recording (color: red) Dot printing type: Ink pad dot printing with each point in a different color Dot printing color: 1 point: red 2 point: 1 red, 2 blue 3 points: 1 red, 2 blue, 3 green 6 points: 1 red, 2 blue, 3 green, 4 violet, 5 puiplc, 6 brown : 10,20 mmyh and fast feed : Approx. 10 sec : Manual Power consumption 50 dB or more Between measuring terminals and ground terminal: 500 V DC. 20 MO or more Between power terminals and ground terminal: 500 V DC, 20 MO or more Between measuring terminals and power terminals: 500 V DC, 20 MO or more Between measuring terminals and ground terminal: 500 V AC for 1 minute Between power terminals and ground terminal: 1000 V AC for 1 minute Between measuring terminals and power terminals: 1000 V AC for I minute Approx. 7 VA Casing Color Mounting Weight : Front door: ABS plastic Flange and rear case: ABS plastic : Gray : Panel mounting : Approx. 1.7 kg 1 : Thermocouple 2 : Resistance thermometer 8 : Current or voltage Power supply Allowable voltage fluctuations Ambient temperature Ambient humidity Allowable signal source resistance Input resistance Max. common mode voltage Common mode :l00dBormore rejection ratio 100, lit), 120, 130,200, 220 230, or 240 V AC, 50/60 Hz +10% to -10% of rated value 10°C to 50°C 30 to 90% RH mV input, thermocouple input: 1 Kfl or less Resistance thermometer input: less than 10 Q per wire Approx. 8 M£2 200 VAC 0 : None 1 : High/Low limit* 2 : High limit* 3 : Low limit* Number 01: I pen ofpoints ID: i dot 02: 2 dots 03: 3 dots 06: 6 dots Functions marked * are optional.

■ STANDARD SCALE ■ TERMINAL BOARD CHINO CORPORATION 32-8, KUMANO-CHO, ITABASHI-KU, TOKYO 173-8632 ■ Tel +81-3-3956-2171 Specifications subjeetto change without notice Printed in Japan (J) 2016 10 Facsimile: +81-3-3956-0915 E-mail inter@chino co jp Website www chino cojp/