Catalogs >
CHINO CORPORATION >
AH4000 Dot-printing

AH4000 Dot-printing
6Pages

Catalog excerpts

AH4000 SERIES 180mm chart MULTI-POINT TYPE HYBRID MEMORY RECORDER AH4000 series is a hybrid recorder which employs bright and clear, easy to view LCD display. Measuring value display is prepared as 1 point display, multi-points simultaneous display and digital display + bar graph display. Various measuring and recording settings can be easily done by front key switch and confirmed by LCD digital display. ■ FEATURES •Corresponds to SD card Equipped with SD card (sold separately) and it can record data, read and write setting value. •Full multi range Equipped with DC voltage 10 kinds, T/C 36 kinds, RTD 12 kinds, in total 58 kinds. Easily set the range per channels. •Easy data management by communication interface Provided with USB port and connect with PC directly. RS232C, RS422A, RS485 and Ethernet communication interface is optionally prepared. When Ethernet is selected, settings from the web and E-mail alarm notification are added. •Package Software attached By Data acquisition software, the use of application expands from recording/management to information processing. *Optional communication interface required. Data analysis software can replay display, wave process, editing and trend display. Parameter setting software can manage the setting information on PC. •Standard alarm display/ Printing function Set 4 types of alarm per each input points. When alarm occurs, status display “ALM” flashes and measuring value flashes at LCD operation screen. •Chart end detection function available Can set the alarm operation when chart end is detected. •Various programming function Process the measured data by programming setting and displayed/recorded data of each channels are shown as programmed result data. •SD card playback function (option) By replaying the saved data files in SD card, you can record or printing back to the chart paper. ■ MODELS AH47m-^m-^N^ Input point 06 : 6 points 12 : 12 points 24 : 24 points Communication interface (option) N : None E : Ethernet R : RS232C A : RS422A/RS485 Q : RS232C+RS485 C : RS422A/RS485+RS485 G : Ethernet + RS422A/RS485 +RS485 F : Ethernet + RS422A/RS485 + Low-order communications Alarm output / remote contacts (option) 0 : None 2 : Mechanical relay 2 points ('a' contact) 4 : Mechanical relay 4 points ('c' contact) + remote contact 5 points A : Mechanical relay 6 points ('a' contact) + remote contact 5 points 8 : Mechanical relay 8 points ('c' contact) + remote contact 10 points B : Mechanical relay 12 points ('a' contact) + remote contact 10 points F : Mechanical relay 16 points ('c' contact) + remote contact 20 points D : Mechanical relay 24 points ('a' contact) + remote contact 20 points Power supply A : 100-240V AC --Carrying handle and feet (option) N : None T: Wi th carrying handle and feet For OP/SP N : None P : SD card playback

Open the catalog to page 1

■NAME 4 Engineering port (USB communication connector) 1. Graphic LCD display Display measured data by digital display and analog indication by bar graph display. •1 point display + bar graph display ■f!ec] is 2. Front key switch Setting contents can be easily registered by front key switch. Press (Menu) key and menu screen (list of setting items) will be displayed to graphic LCD. 3. SD card slot Save measured data to SD card by designated interval (Fastest 12 points: 2 sec). Also, register measuring / recording condition such as range, scale, chart speed and when required, setup the unit...

Open the catalog to page 2

■ RECORDING EXAMPLE •Periodic data printing Record the data with time, scale, chart speed, setting change mark and time line over trace printing by arbitrary interval. Time Digital recording Trace printing •Data print When the latest data is required, trace printing will stop and recorded. Alarm reset channel number •Alarm activation and reset printing When alarm activates/reset, prints time, channel no., alarm type and alarm no. Alarm reset time SD card playback function (option) By replaying the saved data files in SD card, you can record or printing back to the chart paper. It can...

Open the catalog to page 3

■ALARM DISPLAY Alarm display: Alarm types: Alarm settings: Alarm output: Digital recording Chart paper: Fan-fold type Total width 200mm, total length 20m, effective chart width 180mm Chart speed: 1 to 1500mm / h, in 1mm/h increments (12.5mm / h can be set exceptionally) Periodic data printing: Digital printing is added to trace printing at month / day, time, channel no., data, unit Interval (hour/time) arbitrary setting. Data printing: When required, interrupt trace printing and digital print time and measuring value. Alarm printing: Alarm activated — Time, channel no., alarm...

Open the catalog to page 4

PERFORMANCE SPECIFICATION PERFORMANCE SPECIFICATION Case material: Case color: Mounting: Weight: Terminal screw: ■GENERAL SPECIFICATIONS Rated power voltage: 100 to 240VAC, 50/60Hz Maximum power consumption: Max 65VA 100V AC balanced: 22VA, 240V AC balanced: 31VA Normal operation condition: Ambient temperature range: 0 to 50°C (20 to 65%) Ambient humidity range: 20 to 80%RH (5 to 40°C) Power voltage:90 to 264V AC Power frequency:50/60Hz ±2% Attitude: forward tilting 0°, backward tilting 0 to 30°, left/right 0 to 10° Door — Aluminum die-casting Front panel — Glass Case — Cold-rolled steel...

Open the catalog to page 5

PERFORMANCE SPECIFICATION Parameter Setting Software Control the setting information at PC by using communication interface or USB port (standard equipped) Data Acquisition Software You can acquire data easily to your PC. Trend Data Screen Data Analysis Software Open the binary file recorded in the SD card, replay display and edit the trend of acquired data file ■ TERMINAL ARRANGEMENT lAlarm relay output (24 points ‘a' contact) + remote contacts (20 points) and communication interface Remote contact terminals (option) -Power/protective conductive terminals- Communication terminal * RS232C...

Open the catalog to page 6