Catalog excerpts
Jiwei Vibrating Rod Level Switch —— a Reliable Measurement for Alumina The client, a Shanxi Aluminum-Magnesium enterprise is basically producing and processing alumina, aluminum hydroxide, aluminum-magnesium hydrotalcite. Alumina is a kind of inorganic substance and a high hardness compound. As the production process of alumina powder improved, most alumina powders are now less than 1 micron. At the process of electrolyzing alumina, to monitor the material level in alumina silo is significant. The working condition of the electrolytic aluminum plant is extremely harsh, because alumina density is large (3.5g/cm³), and has strong adhesion, plus it is formed by chemical reaction in the electrolytic cell through a strong current, so resulting in a strong magnetic field on the site. At the same time, high temperature and the flying dust make most domestic level switches hard to work reliably in the alumina silo. Thus, the client has been troubled by the difficulty of smooth operation in the high-level automatic filling control system. Rotary paddle switches were used by the client to measure alumina powder level. Rotary paddle switch uses a micro motor as the driving device, and the transmission shaft is connected with the clutch. When the paddle is covered by measured material, the motor stops rotating and its power is switched off automatically. At the same time, a switching signal is generated by a detection device to control the process of material transport /delivery. However, due to the low sealing performance, when measuring powdery materials, the dust can easily penetrate into the sensor, resulting in motor breakdown. Besides, paddle tend to be deformed by material impaction due to the high density of alumina, and the lengthened tube can also easily to be bent, resulting in short service life. After detailed communication with the client, Jiwei engineer recommended Tube-11 Vibrating Level Switch due to the large proportion of alumina particles and the strong magnetic field. The instrument quality of Tube-11 Vibrating Level Switch is comparable to that of imported peers, which has high reliability. Specifically, it has the following characteristics and advantages: Shenzhen Jiwei Automations Ltd.
Open the catalog to page 1
www.jiweiauto.com ● First made-in-China Vibrating Rod Level Switch that is designed with double vibrating tubes. ● High sensitivity thanks to the fine adjustment on the resonant vibrating frequency; suitable for majority granular bulk solids. Measurable medium density can be as low as 0.02g/cm³. ● An industry leading product that can tolerate high process temperature up to 250℃, and ultra-high temperature up to 400℃ (Water/air cooling). ● Excellent in the sediment interface detection and control. ● Larger redundancy to avoid medium buildup and highly reliable for the medium with strong...
Open the catalog to page 2
www.jiweiauto.com Since all Tube-11 Vibrating Level Switches were put into use, the accuracy, stability and reliability fully competent for the level measurement of alumina, and solved the problem of frequent false alarms. Invention Patent– Vibrating Level Switch and the Vibrating Devices (NO. 201510009538.3), and Invention Patent – Mass block and resonant device of Vibrating Rod Level Switch (NO.201510059187.7) Shenzhen Jiwei Automations Ltd.
Open the catalog to page 3All China Shenzhen Jiwei Automations Ltd. catalogs and technical brochures
-
What are Level Switches3 Pages
-
Jiwei Catalog 2024122 Pages
-
Vibrating Level Switch Catalog21 Pages
-
Magnetic Float5 Pages
-
SW-11 Magnetic Switch6 Pages
-
Panel-11 Indicator6 Pages
