Subminiature DC
4Pages

SNAP SWITCHES Technical specications Contact conguration Sealed switch IP6K7 protection Silicon-free variants available Models available for 120 °C operating temperature Switched current 0,1 to 10 A AC (see table) depending on model Various auxiliary actuators available (can also be retrotted) Operating force 200 to 340 cN without auxiliary actuator depending on model Total travel Mechanical life Electrical life Auxiliary actuator options* Ambient temperature Model with leads Without auxiliary actuator Proof tracking index Nominal currents from 10 A at 250 V AC Various application-specic contact materials Mechanical operating life min. 1.000.000 actuations Wide variety of terminal types Simulated roller Plastic straight Plastic roller Plastic simulated roller AuAgPt (Crosspoint) Terminals Auxiliary actuator Stainless steel or plastic Sealing gasket SI, silicon-free alternative available * Order codes identical to DB series, please see page 37 CuZn (silver-plated) Dimensions in mm Rest position Operating point End position For detailed information and the layout of the details described above, please do not hesitate to ask for our technical specications and drawing. Degree of protection (switch interior)

Terminals Q.C. terminal 2,8 x 0,5 max. 30 ° twisted Solder terminal short max. 30 ° twisted PCB terminal 0,6 x 0,5 mm PCB terminal 0,6 x 0,5 mm RH-side w/o location pin RH-side with location pin Side denition with terminals and location pins PCB terminal 0,6 x 0,5 mm LH-side w/o location pin Drilling pattern for PCB terminals 1,3 x 0,5 mm PCB terminal 0,6 x 0,5 mm LH-side with location pin Drilling pattern for lateral PCB terminals 0,6 x 0,5 mm straight / lateral Drilling pattern for lateral PCB terminals 0,6 x 0,5 mm with location pins Auxiliary actuator options Steel auxiliary actuator...

SNAP SWITCHES Electrical rating and operating life Electrical life at rated load for 40T85* (operations) Electrical rating according to EN 61058-1 Mechanical life Housing mark * DC4 only possible as line version with line diameter 0.5 mm2 and AWG 22 Switching parameters Model Without auxiliary actuator

Preferred parts Electrical rating Order code Solder terminal short Solder terminal short Leads 0,75 mm2 on actuator side Auxiliary actuator - Operating Max. force Operating point pretravel (cN) (mm) (mm) Min. Differential overtravel travel max. (mm) (mm) Solder terminal short Solder terminal short Solder terminal short 0,1 A, 125 – 250 V AC Solder terminal short 0,1 A, 125 – 250 V AC Solder terminal short 0,1 A, 250 V AC 0,1 A, 125 – 250 V AC Leads 0,5 mm2 on actuator side