CYLSN-1000E Microcomputer Controlled High Strength Bolt Testing Machine

Product catalog summary

Introduction
The CYLSN-1000E Microcomputer Controlled High Strength Bolt Testing Machine is designed to comply with various national and industry standards, including GB/T 2611-2007, JB/T 9370-2015, and ASTM standards. It is used for testing the axial force, torque, and torque coefficient of high-strength bolt connection pairs.

Technical Specifications

Voltage: Control system 220VAC; Motor AC 380V
Total Motor Power: 5.0KW
Output Speed: 0.1-4r/min
Axial Force Detection Range: 100-1000kN
Torque Detection Range: 100-5000Nm
Compatible Bolt Specifications: M10 to M39
Bolt Length: 30mm to 350mm (≥2.5d)
Test Accuracy: Axial force ±1.0%, Torque ±1.0%
Torsion Angle Measurement Range: 0-1000°
Weight: Approximately 2000kg

Control Methods
The machine can be controlled by setting axial force, torque, or rotation angle. It allows for setting initial torque and target angles to test torque and axial force values.

Configuration List
The equipment includes a test host with sensors, a servo motor drive system, a microcomputer-controlled controller, a Lenovo computer, nut sleeves, bolt plates, and an optional safety shield.

Catalog excerpts

CYLSN-1000E Microcomputer Controlled High Strength Bolt Testing Machine-1

QINGDAO CHENGYU TESTING EQUIPMENT CO.,LTD. Factory Address:HUAIYIN DISTRICT,JINAN CITY,SHANDONG PROVINCE,CHINA International Office address: Huangdao District,Qingdao City,Shandong Province,China. Telephone Number: +86-18560675307 Email address: [email protected] Website: www.cytesting.com/www.cytester.com CYLSN-1000E Microcomputer Controlled High Strength Bolt Testing Machine 1.CYLSN-1000E Introduction 1.1 Application ： The detector is based on GB/T 2611-2007 "General Technical Requirements for Testing Machines", JB/T 9370-2015 "Technical Conditions for Torsional Testing Machines", JJG 139-2014 "Testing Machine Verification Regulations" and other commonly used national and industry testing machine standards . At the same time, refer to GB/T1231-2006 "Technical Conditions for Large Nuts Force "Construction Quality of Steel Structure Engineering" "Acceptance Specification",

Open the catalog to page 1