CHEMOLLI-FIREBOLT A2.0
7Pages

TECHNICAL DATA SHEET CHEMOLLI-FIREBOLT A2.0 PRODUCT DESCRIPTION Active bolt for fire resistant doors designed to eliminate deformation of the point where it is installed, between leaf and frame, between leaves, and leaf and support. Galvanised metal cylindrical body in one piece, machined from solid, dimensions 14x42 mm, fixing flange 25x3 mm. Conical metal sealing pin, variable diameter 5 to 3 mm, length 17.5 mm, stroke 16 mm. Internal compression spring with 25 N thrust, operating temperature up to 540 °C, heating element to be installed if required. Weight of device, complete with strike: 51 grams. Heating element with trigger temperature of 110-150° C. Pic. 1 CHEMOLLI S.r.l. a socio unico via Sant’Alessandro 2/E 38066 | Riva del Garda (TN +39 0464 518969 info@chemollifire.com Dimensioned drawing C.F./P.I./VAT IT02261290221 REA TN 211494 Albo Artigiani Sezione speciale – nr.57

SECTION WITH COMPONENT IDENTIFICATION External cylinder Thermofusible element Fixing element EXTENDED STATE RETRACTED STATE POSSIBLE POSITIONING – WITHOUT HEATING ELEMENT Leaf installation with strike on the frame Frame installation with strike on leaf Leaf installation with strike on support or second leaf CHEMOLLI S.r.l. a socio unico via Sant’Alessandro 2/E 38066 | Riva del Garda (TN +39 0464 518969 info@chemollifire.com C.F./P.I./VAT IT02261290221 REA TN 211494 Albo Artigiani Sezione speciale – nr.57

POSSIBLE POSITIONING – WITH HEATING ELEMENT If it is necessary to transmit the temperature to the Chemolli Firebolt A2.0 device more quickly, a metal heating element can be used, which can be placed on top of the thermos fusible element. For example, a 5 mm diameter steel bar Leaf installation with strike on the frame Frame installation with strike on leaf Leaf installation with strike on support or second leaf CHEMOLLI S.r.l. a socio unico via Sant’Alessandro 2/E 38066 | Riva del Garda (TN +39 0464 518969 info@chemollifire.com C.F./P.I./VAT IT02261290221 REA TN 211494 Albo Artigiani...

POSITIONING TIPS It is reccomended to position the CHEMOLLI-FIREBOLT A2.0 device at points subject to deformation due to distance from constraints such as hinges, fixed rods, locks and other restraints. Also assess the tightness of the restraints during the execution of the resistance test, as some of them, such as hinges, may fail during the test. The exact positioning must be studied according to the characteristics of the lock and its fire behaviour. If necessary, CHEMOLLI FIRE will be able to advise you on possible positioning after analysis. It is also possible to use several...

Below are some tips for positioning: If the door is wider than 1000 mm If there are no bolts on the secondary leaf If the door is higher than 2300 mm If the leaf is wider than 1000 mm If the leaf is higher than 2300 mm Close to the lock if fitted with a plastic latch bolt Close to the lock if fitted with a plastic latch bolt CHEMOLLI S.r.l. a socio unico via Sant’Alessandro 2/E 38066 | Riva del Garda (TN +39 0464 518969 info@chemollifire.com C.F./P.I./VAT IT02261290221 REA TN 211494 Albo Artigiani Sezione speciale – nr.5781

ASSEMBLY INSTRUCTIONS DRILLING SCHEME INSTALLATION SCHEME Element A Chemolli-Firebolt A2.0 TPSC 3x40 mm fixing screw Ø 14,5 mm hole, 43 mm deep Element B Strike Ø 26 mm notch, 3 mm deep if desired Pic. 5 Drilling scheme Counterhole min. Ø 10 – max Ø 12 mm, 15 mm deep. Ø 26 mm notch, 3 mm deep, if desired Pic. 6 Installation scheme Given the different positioning possibilities, as shown in figure 3, follow figs. 5-6 for installation. Element A is the element on which the CHEMOLLI-FIREBOLT A2.0 device will be housed. Element B is the element on which the counter hole is to be drilled. It is...

LIMITED WARRANTY CONDITIONS The CHEMOLLI-FIREBOLT A2.0 device is subject to the legal guarantee in force. A guarantee seal with the serial number of the device is affixed to the device. Warranty exclusions: it is forbidden to alter, break or remove the warranty seal; alter, modify, the device components; make any adjustments or adjustments to the device components. The warranty is limited in any case to the replacement of the device and not to any further damage that may occur after installation or to compensation for damages in the event of failure to function. Any complaints must be made...