CHEMOLLI-FIREBOLT A2.0 LONG
6Pages

TECHNICAL DATA SHEET CHEMOLLI-FIREBOLT A2.0 LONG PRODUCT DESCRIPTION Active bolt for fire resistance doors to eliminate deformation of the point where it is installed, between leaf and frame, leaf and leaf, leaf and support. Galvanised metal cylindrical body in one piece machined from a solid part, dimensions 14x52 mm, fixing flange 25x3 mm. Conical metal sealing pin, variable diameter from 5 to 3 mm, length 27.5 mm, stroke 23 mm. Spring in internal compression with 25N thrust, with operating temperature up to 540°C, heating element to be installed if necessary. Weight of the device, complete with striker 51 grams. Thermo-fuse element with ignition temperature of 110-150 °C. CHEMOLLI S.r.l. a socio unico C._______________________________________________________________________________________________________www.chemollifire.com via Sant’Alessandro 2/E 38066 | Riva del Garda (TN) +39 0464 518969 info@chemollifire.com C.F./P.I./VAT IT02261290221 REA TN 211494 Albo Artigiani Sezione speciale – nr.57

SECTION WITH COMPONENTS IDENTIFICATION Pin External cylinder Thermofusible element Sprin Fixing element RETRACTED STATO EXTENDED STATE Pic. 2 Detail POSSIBLE POSITIONING – WITHOUT HEATING ELEMENT Leaf installation with strike on the frame Frame installation with strike on leaf Leaf installation with strike on support or second leaf CHEMOLLI S.r.l. a socio unico C._______________________________________________________________________________________________________ www.chemollifire.com via Sant’Alessandro 2/E 38066 | Riva del Garda (TN) +39 0464 518969 info@chemollifire.com C.F./P.I./VAT...

POSSIBLE POSITIONING – WITH HEATING ELEMENT If it is necessary to transmit the temperature more quickly to the CHEMOLLI-FIREBOLT A2.0 LONG device, it is possible to use a metal heating element to be placed in support of the thermo-fuse element. For example, a 5 mm diameter steel bar. Leaf installation with strike on the frame Frame installation with strike on leaf Leaf installation with strike on support or second leaf CHEMOLLI S.r.l. a socio unico C._______________________________________________________________________________________________________ www.chemollifire.com via...

POSITIONING TIPS It is recommended to position the CHEMOLLI-FIREBOLT A2.0 LONG device in points subject to deformation due to the distance from constraints such as hinges, fixed bolts, locks and other restraint devices. Also evaluate the tightness of the constraints during the resistance test, as some of these, such as hinges, may give way during the test. The exact positioning should be studied according to the characteristics of the lock and its fire behaviour. If necessary, CHEMOLLI FIRE can advise you on possible positioning after analysis. It is also possible to use several...

DRILLING SCHEME INSTALLATION SCHEME Element A Ø 14,5 mm hole, 53 mm deep Chemolli-Firebolt A2.0 Fixing screw TPSC 3x40 mm Ø 26 mm notch, 3 mm deep, if needed Pic. 5 Drilling scheme Strike Counter hole min. Ø 10 – max Ø 12 mm, depth 15 mm. Ø 26 mm notch, depth 3 mm, if needed Given the different positioning possibilities, as shown in figure 3, follow pic. 5-6 for installation. Element A is the element on which the CHEMOLLI-FIREBOLT A2.0 LONG device will be housed. Element B is the element on which the retention counter-hole must be made. It is always advisable to arrange the device and the...

The CHEMOLLI-FIREBOLT A2.0 device is subject to the legal guarantee in force. A guarantee seal with the serial number of the device is affixed to the device. Warranty exclusions: it is forbidden to alter, break or remove the warranty seal; alter, modify, the device components; make any adjustments or adjustments to the device components. The warranty is limited in any case to the replacement of the device and not to any further damage that may occur after installation or to compensation for damages in the event of failure to function. Any complaints must be made after requesting a return...