1. Catalogs
  2. ChemiTek
  3. DRONE SURFACE CLEANING AGENT inorganic
video corpo

DRONE SURFACE CLEANING AGENT inorganic

DRONE SURFACE CLEANING AGENT inorganic

Product catalog summary
Product Overview:
ChemiTek's biodegradable and concentrated cleaning agent is designed for heavy-duty cleaning and descaling of inorganic soiling and industrial pollution. It is suitable for use on acid-resistant metals, glass, bricks, concrete, and unpolished natural stone.
Key Features:
  • High descaling strength formula.
  • High foaming formula with only 5 minutes of dwell time.
  • Non-flammable and water-based, making it environmentally friendly.
  • Free of solvents, ammonia, and bleach.
Application Recommendations:
  • Recommended dilution ratio is between 1:5 and 1:20.
  • Minimum application rate is 0.15L/m².
  • Optimal water temperature for application is between 5ºC and 75ºC, with 75ºC to 90ºC recommended only in extreme cases.
Cleaning Capabilities:
  • Effective against mineral scale, cement dust, white stains in concrete, metal oxides, rust stains, hard water spots, and other inorganic residues.
Disclaimer:
The recommendations provided are based on practical and laboratory experience and are intended as guidance. ChemiTek advises conducting preliminary tests if there is any doubt, as the application of the product is beyond their control.
See more

Catalog excerpts

DRONE SURFACE  CLEANING AGENT  inorganic-1

DRONE SURFACE CLEANING AGENT inorganic DESCALING CLEANING STRENGTH Heavy-duty cleaner and descaler for inorganic soiling and industrial pollution MINERAL SCALE CEMENT DUST WHITE STAINS IN CONCRETE RUST STAINS METAL OXIDES Make your life easier while being safe: HARD WATER SPOTS & STAINS OTHER INORGANIC RESIDUES High descaling strength formula Non-flammable – water based High foaming formula environment friendly: free of solvents, ammonia and bleach only 5 minutes of dwell time Suited for acid resistant metals, glass, bricks, concrete and unpolished natural stone 1:5 up to 1:20 dilution 0,15L/m2 minimum Recommended water temperature: 5ºC to 75ºC (75ºC to 90ºC only in extreme cases) ChemiTek - Química Avançada, S.A. Rua Dr. Francisco Sá Carneiro - Zona Industrial de Bouro, Letra C | 4740-010 Esposende, Portugal [email protected] | www.chemitek.pt The suggested recommendations are based on practical and laboratory experience and serve only as guidance. Since the application of the products is beyond our control, our responsibility is limited only to maintaining their characteristics. ChemiTek recommends, in case of doubt, the realization of previous tests. The images are merely illustr

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.