Remote control Remote control 4Storage and transmission of information and alarms via GSM

Storage and transmission of information and alarms via GSM 4Easy conguration using the SW supplied 4LCD for immediate verication of the status of the inputs and the intensity of the GSM signal. 4USB serial port for conguration and data download, password-protected 4Available in a panel version for DIN bar The SK 2040 GSM ALARM device makes it possible to: 4Monitor 8 analogue inputs with possibility of programming two thresholds for each input and sending an text message alert when either is exceeded 4Monitor 8 digital inputs which can be congured as alarm or count Remote control – Alarm conguration....

Technical specifications ► Power supply 24 VAC/DC +30% ► 8 digital inputs - 24 VAC/DC - photo-coupled. Pulse filter ► Non-optically isolated RS485 serial port for input/output ► Backup battery input and text message sent due to power ► 4 ON/OFF digital outputs, max resistive load 1 A 230 ► GSM/GPRS internal modem (SIM card not included) Quad band RF peak power 2W (+33 dBm) on 50 Ohms. SIM compatible with phase 2 GSM 11.14. SIM 3/5 VDC ► MODBUS RTU communication protocol ► Data logger 2 MB of memory (1 2,000 records) ► Minimum recording interval 1 min. ► Alphanumeric LCD display 2 x 1 6 for 1...

Software versions available 4Vocal: This records up to four alarm messages as an alternative to the text message mode. 4Master-Slave: This enables you to use the control unit for Point-toPoint type automations, to generate spontaneous calls dedicated to activating/deactivating a relay. 4Low-Power: This enables you to use the control unit as a data logger with very low absorption (for battery operation where there is no mains power supply). 4Data logger: Without GSM for recording, viewing and downloading of data only. SK 2040 GSM Alarm MASTER / SLAVE Version The SK 2040 GSM Alarm devices, in the...