neodisher® Active oxygen-based cleaning enhancer for the automated cleaning of instruments using the Miele OXIVARIO process Liquid concentrate Fields of application: Use as a component in combination with alkaline detergents in the "Oxivario" and "Orthovario" processes developed and recommended by Miele Please observe the instructions of the Miele company concerning use and dosage as well as material tolerance.1) After the whole Miele OXIVARIO-process it is recommended that hinge instruments be treated with neodisher IP Spray. The neodisher OXIVARIO solution has to be rinsed off completely (preferably with deionised water). Do not mix with other product concentrates. For avoiding water stains the use of deionised water in the final rinse is recommended. Use suitable dosing devices. For professional use only. Rinse out dosing system including hose with water before changing product. Reprocessing should comply with all ordinances pursuant to the regulations on medical devices and should be performed with appropriate validated processes. Please observe the reprocessing recommendations of the medical device manufacturers according to the requirements of the DIN EN ISO 17664. Technical data: pH range Density Viscosity 5.7 - 5.5 (0.3 - 0.7 %, determined in deionised water, 20 °C) approx. 1.1 g/cm3 (20 °C) < 50 mPas Ingredients according to Regulation (EC) No 648/2004 on detergents: > 30 % oxygen-based bleaching agents CE-mark: neodisher OXIVARIO complies with European guidelines for medical devices. If a serious incident occurs with the product, report it to the manufacturer and the relevant national authority. Storage information: Always store at a temperature between - 20 °C and 25 °C. Keep away from sunlight. Usable for 2 years when stored as recommended. For expiry date refer to the stamp mark on the label behind the hourglass symbol . Hazard and precautionary statements: For safety information see Safety Data Sheets. These are available e.g. at www.drweigert.com under the category “Service/Downloads”. Dispose only when container is empty and closed. For disposal of product residues, refer to Safety Data Sheet. MB 4004/3-3 Date of issue: 01/2023 1) The Chemische Fabrik Dr. Weigert GmbH & Co. KG is not responsible for any legal obligations (guarantees) concerning possible changes of medical devices reprocessed with these Miele processes. With the above information, to our current knowledge we describe our product regarding safety necessities, but we do not involve any quality description or promise certain properties.