neodisher® MediClean advanced
2Pages

neodisher® MediClean advanced Detergent for reprocessing thermostable and thermolabile instruments Liquid concentrate Fields of application: • Automated cleaning of thermostable and thermolabile instruments including MIS instruments and micro-instruments, flexible endoscopes, dental instruments, anaesthesia equipment, containers and other medical utensils Manual cleaning of thermostable and thermolabile instruments in immersion baths or ultrasonic baths Suitable for the manual and automated cleaning of da Vinci EndoWrist instruments and other instruments used in robot-assisted surgery Performance spectrum: • Reliably removes residues of dried and denatured blood, protein, fat, mucus, secretion and bone meal with a simultaneous high degree of material protection. Supports the removal of biofilms Fulfils the current recommendations of the German Robert-Koch-Institute (RKI) for minimising the transmission risk of the new variant of the Creutzfeldt-Jakob Disease (vCJD) when reprocessing medical devices Suitable for instruments, optics and utensils made of stainless steel (e.g. 1.4301), instrument steel (e.g. 1.4034), titanium, glass, ceramics, reprocessable plastics, materials of anaesthesia equipment and anodised aluminium Anodised aluminium must be tested first for suitability due to differing qualities. Special properties: • • • • • Highly concentrated: maximum yield for optimum economy and conservation of resources Excellent cleaning performance with minimised dosing amounts Low-foaming; dosing possible directly after the water inlet of the cleaning stage Increased efficiency when removing dull discolourations and deposits Gives brilliance to the instruments The reduction of biofilms has been tested and confirmed in accordance with ISO/TS 158835:2005 When used for manual pre-cleaning, no rinsing of the cleaner solution is necessary for subsequent mechanical reprocessing A neutralisation step is not necessary Good rinsing properties neodisher MediClean advanced can be used in washer disinfectors as well as in immersion and ultrasonic baths. The dosing amount can be adapted to the area of application, the degree of soiling of the instruments and the requirements of the operator for the process used. The following parameters are recommended when using neodisher MediClean advanced: Automated cleaning of thermostable and thermolabile instruments Automated cleaning of containers made of anodised aluminium Automated cleaning of instruments used in robotassisted surgery Automated cleaning of flexible endoscopes Manual cleaning of thermostable and thermolabile instruments in immersion and ultrasonic baths Manual cleaning of instruments used in robotassisted surgery in immersion and ultrasonic baths Manual cleaning of flexible endoscopes and endoscopic accessories in immersion and ultrasonic baths * the dosing amount depends on the degree of contamination ** the contact times depend on the water quality, the degree of soiling and the cleaning mechanics *** The reprocessing recommendations of the medical device manufacturer in accordance with the requirements of DIN EN ISO 17664 and the procedure tests must be taken into account. Chemische Fabrik Dr. Weigert GmbH & Co. KG Mühlenhagen 85 • D-20539 Hamburg

neodisher® MediClean advanced Use suitable dosing devices. neodisher MediClean advanced can be used with deionised water, softened water and drinking water. For automated methods, a maximum total hardness < 3°dH (< 0.5 mmol CaO/l) is required for the cleaning step and the intermediate rinse according to relevant recommendations. For optimum results the use of deionised water is recommended in the cleaning step as well as in the final rinse. When using deionised water in the final rinse water stains are avoided and anodised aluminium is protected at the same time. When reprocessing...