caraform® active Intensive degreaser for surfaces and equipment Liquid concentrate For very dirty surfaces and equipment and in all food processing fields such as professional kitchens, butcher’s shops and bakeries Performance spectrum: • Even removes stubborn fat layers from surfaces such as extractor hoods, working surfaces and equipment Suitable for all materials such as glass, porcelain, plastic and stainless steel Aluminium, anodised aluminium and light metal alloys should be tested first Application and dosage: Dilute caraform active according to the below mentioned dosing recommendations. Apply the working solution on the surfaces to be cleaned and allow it to act for some minutes. Then rinse the solved dirt particles with plenty of fresh water. Light soiling Heavy soiling and fat layers For an economical and controlled dosage the use of manual dosing ancillaries such as mixing equipment or dosing accessories is recommended. Please contact us. Surfaces that come into contact with food must be rinsed with drinking water after each cleaning and disinfection to remove residues. Do not mix with other products. Storage and transport is only permitted in original packaging. Special Properties: • Fast and powerful cleaning action Universal application Excellent material comp

caraform® active Hazard and precautionary statements: Technical data: pH-value 11.6 - 12.8 (5 - 100 ml/l, determined in deionised water, 20 °C) For safety information see safety data sheets. These are available at www.drweigert.com under the category “Service/Download”. If applied according to the instructions for use the product is safe according to the appropriate guidelines for food processing. Dispose only when container is empty and closed. For disposal of product residues, refer to the Safety Data Sheet. Ingredients: Ingredients according to Regulation (EC) No 648/2004 on detergents: <...