Probes & accessories for SCOPIX oscilloscopes Active safety as soon as they are connected Quick, error-free measurements Scaling and units managed automatically Sensors powered directly by the oscilloscope

PROBIX VOLTAGE MEASUREMENT HIGH FREQUENCY Electronic voltage probe 1/10 – 500 MHz – 300 V Cat III Reference cable with crocodile clip The HX0030C probe offers direct reading of the measurement thanks to automatic scaling (no adjustments necessary on the SCOPIX analyseroscilloscope). It is equipped with 2 configurable buttons for remote control of SCOPIX. Plug-in hook-type wire grip Coloured rings associated with the curve. LED to light the work area Coloured rings to identify the probe and connector This accessories kit is used with the HX0030B and HX0030C. For electrical / power electronics...

PROBIX CURRENT MEASUREMENT HX0034B 0.02 A – 60 Arms current clamp / 1 MHz / Input/output ratio 20 mV/A / ø 26 mm The HX0034 current clamp uses a Hall-effect cell and can measure alternating or direct currents up to 80 A peak, without any action on the electrical installation. Its internal electronics is powered by the oscilloscope via the connection cable. The measurement output is entirely isolated to ensure safety. It is equipped with 2 configurable buttons for remote control of SCOPIX. The DC offset is compensated automatically by pressing a button. AmpFlex® current sensor Probix 4-20 mA adapter...

PROBIX ACCESSORIES ACCESSORIES FOR USE WITH CMS banana cable MISCELLANEOUS ACCESSORIES FOR SCOPIX IV HC-type μSD card (storage capacity: please contact us) Removable digital data storage memory card The HX0080 μSD /USB card reader is also delivered with the HX0179. Demo test circuit 50 Ω 600 V BNC/BNC cable Stylus kit This kit comprises 5 spare styluses for use on the SCOPIX IV touch screen. * Select the 100 mV/A range on the clamp for use with the HX0031. 40 W mains power pack/charger Mains power pack, LI-ION battery and charger support. The HX0061 can be used to power the SCOPIX from a vehicle...