PAC Series AC/DC Hall-effect current clamps Genuine automatic DC Zero Power, DC Zero Adjustment and Range Overrun LEDs Deactivatable automatic power-off Extra electrical safety for measurements in the field Double power supply: battery & standard external 5 Vdc power pack

PAC Series Effectiveness in your hand The PAC 10 and PAC 20 Series clamps offer an ergonomic design and high-performance technical specifications making them extraordinarily simple to use. The PAC models can be used to measure direct or alternating, sinusoidal or distorted currents with or without a DC component. The result of considerable study in the field, the PAC Series is available with 2 specific jaw shapes. Hooked up to a multimeter, logger, oscilloscope, etc., the PAC clamp simplifies measurement of all currents, without any risk and without shutting down the installation. h soon as a...

AC/DC Hall-effect current clamps Mark for centring the conductor Conductor insertion Anti-slip safety guard Clamps for oscilloscopes When you view a current, it reveals the parameters needed to interpret it: waveform, level of distortion, Peak values, etc. Automatic DC Zero and deactivatable automatic poweroff function They are particularly safe to use. The simple fact of clamping the cable with the clamp isolates the user from the circuit tested. These clamps are also called isolated current probes. Trigger for opening clamp Clamp for medium and high currents In the rail sector, mining, chemicals...

PAC Series - AC/DC Hall-effect current clamps Technical specifications PAC 15 For multimeters, loggers, etc. Measurement range(s) 0.5 .. 400 A AC RMS 0.5 .. 600 A DC Bandwidth (1) Sensitivity Best accuracy Output connector Length of built-in cable Admissible load of measuring instrument Ø 4 mm isolated elbowed male safety plugs 1.5 m Ø 4 mm isolated elbowed male safety plugs 1.5 m 9 V battery / 5 V DC µUSB type B 50 hours typical 9 V battery / 5 V DC µUSB type B 50 hours typical automatic deactivatable Automatic automatic deactivatable Automatic External power supply / Battery status Standby...