AC/DC ampèremetriques pour courant AC Pincescurrent probes K SERIES The K series is a new product range with exceptional measurement capabilities. Extremely compact in design, these “micro-probes” are designed for highly accurate measurement of very low currents. Their small dimensions and shape make them ideal for probing into tight spaces where access is limited, as is the case on most switchboards, 4-20 A process loops or vehicle wiring looms for example. These “K” series current probes make excellent work companions for multimeters and any other instrument able to make use of their high sensitivity, dynamic range and ability to indicate the shapes of signals and wavefoRMS. Non-contractual document They give an AC+DC output signal that is proportional to the measured current, without needing to change the range or filter the signal. RMS measurements are possible with DC+AC components. There are two different types of K series current probes available. Model K1 gives a 1 mV/mA output and lends itself to a variety of different applications, oriented towards low-current measurement. Model K2 has a greater level of sensitivity with its 10 mV/mA output.

AC/DC ampèremetriques pour courant AC Pincescurrent probes Non-contractual document

AC/DC ampèremetriques pour courant AC Pincescurrent probe Model K1 Current DESCRIPTION The K1 model measures currents as low as 100 μA AC or DC. The clamp provides a proportional output signal enabling direct readings on multimeters. ELECTRICAL SPECIFICATIONS • Current calibres: 1 mA DC .. ± 4.5 A DC 1 mA RMS .. 3 A RMS (sinusoidal) 1 mA .. 4.5 A peak, square and steps Output (output voltage): 1 mV / mA Resolution: DC: 50 µA typical AC: 100 µA typical Accuracy (1): DC current Primary current % Accuracy of output signal AC current from 45 Hz to 65 Hz Primary current % Accuracy of output signal...

AC/DC ampèremetriques pour courant AC Pincescurrent probe Model K2 Current DESCRIPTION The K2 model measures currents as low as 100 μA AC or DC. The probe has a proportional output for direct readings on multimeters. ELECTRICAL SPECIFICATIONS • Current calibres: 0.1 mA DC .. ± 450 mA DC 0.1 mA RMS .. 300 mA RMS (sinusoidal) 0.1 mA peak .. 450 mA peak, signal square and steps Output (output voltage): 10 mV / mA Resolution: DC: 50 µA typical AC: 100 µA typical Accuracy (1): I Primary current % Accuracy of output signal I Primary current % Accuracy of output signal Frequency response: DC to 1.5...