*mydirectindustry

ELINK 61850

Product catalog summary

Overview
The document describes the ELINK 61850 communication solution, which serves as a gateway for connecting ENERIUM power monitors and TRIAD 2 transducers to an IEC 61850 network. It highlights the ease of implementation via web pages and the capability to support up to 20 slave devices.

Specifications

Communication Protocol: IEC 61850, Modbus RS485 Master
Supported Logical Nodes: MMXU, MMXN, MSTA, MMTR (Triad2/Enerium), MHAI, MHAN (Enerium)
Ethernet Port: RJ45 - 8 contacts / 10 - 100 baseT
RS485 Ports: Independent RS485 - 2 isolated wires, Modbus RTU mode, Master / Half-duplex mode, Speed: 300 to 115,200 bauds
Auxiliary Power Supply: AC 80 to 265 Vac - 10 VA / 42.5 to 69 Hz, DC 80 to 265 Vdc - 7 W
Mechanical Specifications: Weight 560 g, Dimensions 120.5 x 120 x 81 mm, Mounting on DIN rail
Environmental Constraints: Operating temperature -10 °C to +55 °C, Storage temperature -25 °C to +70 °C, Ingress protection IP20
Safety and Electromagnetic Standards: IEC 61010, IEC 61000 series

Features

Comprehensive handling of electrical measurements from Enerdis equipment using the IEC 61850 protocol.
Supports instantaneous, min/max/average, energy, and energy quality measurements for ENERIUM.
Facilitates installation upgrades by interfacing with existing equipment to modernize installations into IEC 61850 digital substations.
Upgradable solutions provided by Enerdis for adapting ELINK 61850 to specific applications.

Ordering Information
Product Code: ELINK 61850 P01380850

Contact Information

France: Chauvin Arnoux, 190, rue Championnet, 75876 PARIS Cedex 18, Tel: +33 1 44 85 44 85
United Kingdom: Chauvin Arnoux LTD, Dewsbury, West Yorkshire, Tel: +44 1924 460 494
Middle East: Chauvin Arnoux Middle East, Lebanon, Tel: +961 1 890 425

Catalog excerpts

COMMUNICATION SOLUTION IEC 61850 network communication gateway for TRIAD 2 transducers and ENERIUM power monitors Communication: IEC 61850 – Edition 2 server Modbus RS485 Master TRIAD 2 and ENERIUM seen as IEC 61850 native products Easy implementation via web pages High performance: up to 20 slave devices

Open the catalog to page 1

The ELINK 61850 communication gateway Electrical specifications can be used to connect ENERIUM power monitors and TRIAD 2 transducers to an IEC 61850 network. The ENERIUM and TRIAD 2 products are seen as IEC 61850 native products by any supervision system or IEC 61850 SCADA / RTU client PLC. Auxiliary power supply Power reserve Sections Logical nodes supported Ethernet port RS485A and RS485B ports AC: 80 to 265 Vac - 10 VA / 42.5 to 69 Hz DC: 80 to 265 Vdc - 7 W 2.5 seconds (with 230 Vac) IEC 61850-1, IEC 61850-5, IEC 61850-7 MMXU, MMXN, MSTA, MMTR (Triad2/Enerium) MHAI, MHAN (Enerium) RJ45 -...

Open the catalog to page 2

All CHAUVIN ARNOUX catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list