*mydirectindustry

C.A 5011

Product catalog summary

Overview: The C.A 5011 is a TRMS analogue and digital multimeter designed for accurate and quick readings. It features reinforced safety with two LEDs indicating fuse status and voltage presence. The device is compact, shockproof, and includes a multi-purpose stand.

Specifications:

Voltage Ranges: 400 mV to 1,000 V
Impedance: 10 MΩ
Operating Frequency: 20 Hz to 10 kHz
Current Ranges: 400 µA to 10 A
Resistance Ranges: 400 Ω to 40 MΩ
Frequency Ranges: 4 kHz, 40 kHz, 100 kHz
Accuracy: 0.5% on voltage, 1% on current and resistance
Power Supply: 9 V battery with 300 hours life
Safety: IEC/EN 61010-1, 1,000 V/Cat III, 600 V/Cat IV
Protection: 1 A and 10 A HRC fuses
Ingress Protection: IP 53
Environmental Conditions: -10 °C to +55 °C, HR < 90%
Dimensions/Weight: 160 x 105 x 56 mm / 500 g

Features:

Automatic AC/DC recognition
Digital display with backlighting and memory storage
Analogue display usable as a zero galvanometer
True RMS value measurement suitable for non-linear loads
MultistandTM for storing test probe leads

Accessories: The multimeter comes with silicone test probes and is available with a hard case. Additional accessories include a shoulder bag, holster case, and carrying case with foam inserts. Safety accessories like crocodile clips and voltage probes are available, complying with IEC 61010-031 standards.

Contact Information: For inquiries and orders, contact Chauvin Arnoux in France, the UK, or the Middle East. Detailed contact information is provided for each region.

Catalog excerpts

TRMS analogue and digital multimeter Genuinely effective Reinforced safety by means of 2 LEDs: - "Fus" light: HBC fuse test - "VoltestTM" light: present of voltage on ohmmeter Two complementary readings: - Digital for accuracy, with backlighting - Analogue for quick readings Automatic AC / DC recognition Compact, shockproof case, with "MultistandTM" multi-purpose fold-away stand

Open the catalog to page 1

TRMS analogue and digital multimeter TRMS: true RMS value The C.A 5011 multimeter gives the true RMS value whatever the signal, whether sinusoidal or distorted. It is therefore suitable for all types of installations, including those with non-linear loads (fluorescent lighting, switching power supply…). It is equipped with automatic signal-type recognition, (AC (~) or DC ( )). It can also be used to access the different signal components ( , ~, + ~), if they exist, by simply pressing the ~ key. Operating frequency Audible continuity test Frequency The "MultistandTM" jointed clip This is also...

Open the catalog to page 2

All CHAUVIN ARNOUX catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list