*mydirectindustry

ST37X STAND-ON TRENCHER

Product catalog summary

Introduction
The ST37X stand-on trencher is designed for creating footings on residential or commercial properties. It is versatile, capable of installing drainage pipes, and performing various trenching tasks.

Enhanced Productivity
The trencher features an integrated digging system that provides more power to the attachment, enhancing productivity for footings and landscape jobs.

Engineered to Deliver
Powered by a 37-hp, Tier 4 Yanmar® diesel engine, the ST37X offers significant jobsite impact and productivity.

Maximized Performance
The multi-position trencher allows operators to trench directly next to the backer board, improving efficiency.

Fast and Effective
The trencher can create trenches up to 16 inches wide and 36 inches deep, offering cleaner and more consistent footings than an excavator in less time.

Durable Build
Its construction-grade design supports heavy-duty operation and a longer lifespan, increasing contractor ROI.

Key Features/Benefits
The ST37X trencher is introduced as a stand-on trencher with various specifications.

Specifications

Dimensions: Overall height is 57 inches, length without chain is 104.5 inches, and width is 42 inches.
Power: Equipped with a Yanmar® 3TNV88C diesel engine, 37 hp, compliant with EPA Tier 4 Final and EU Stage IIIA emissions.
Performance: Ground drive speed is 4.7 mph forward/reverse, with a ground pressure of 5.5 psi on 9-inch tracks.
Hydraulic System: Features a double gear pump with a combined flow rate of 13.9 gpm and pressure of 3,625 psi.
Fluid Capacities: Fuel tank capacity is 10.5 gallons, engine oil with filter is 5 quarts, and hydraulic reservoir capacity is 9.2 gallons.
Noise Level: Sound power is 103 dBA, and sound pressure at the operator's ear is 89 dBA.

Specifications are subject to change without notice, and exact measurements should be verified if required.

Catalog excerpts

Ideal for creating footings on residential or commercial A multi-position trencher allows operators to trench properties, the ST37X stand-on trencher can install drainage directly next to the backer board. pipe or perform other trenching tasks. Integrated digging system allows for more power to the deep, creating cleaner, more consistent footings than attachment and increased productivity on footings and an excavator in less time. landscape jobs. Construction-grade design allows for heavy-duty Powered by a 37-hp, Tier 4 Yanmar diesel engine for operation and a longer lifespan, which means increased more jobsite impact and productivity.

Open the catalog to page 1

U.S. METRIC U.S. METRIC DIMENSIONS (STD) Overall height of machine 5/ in Overall length of machine, w/out chain 104.5 in Overall length of machine, 36-in chain (L2) 130 in Overall width of machine 42 in Ground clearance, min, center/side 7.4/3.7 in Machine width, excluding tracks 35 in Swing radius, front, 36-in chain 81 in Swing radius, rear 44 in Boom travel down (C) 60° Centerline trench to edge (E1) 4-20 in Centerline trench to edge (E2) 21-3/ in PERFORMANCE Ground drive speed Forward/reverse Ground pressure 9-in (230-mm) tracks Machine weight (30-in...

Open the catalog to page 2

All The Charles Machine Works, Inc catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list